6 Point, Fully Fitted, Motor Sport Compliant Internal Roll Cage
Once we have booked your vehicle in it only takes us a few days. We design your weld in or bolt in roll cage, specifically to your vehicle and requirements. We submit the design (if needed) for your approval then build your roll cage using state of the art Numerical Controlled or CNC controlled highly accurate Tube Bending Machinery . We then install your motor sport compliant custom made roll cage. please book early spaces are always limited to availability.
Each cage comes with the following components,
1) Rear Hoop
2) Rear Hoop Diagonal
3) 2 x Side Bars
4) 2 x Rear Stays
5) 1 x Harness Bar
6) 1 x Windscreen Bar
7) 2 x Door Bars
8) All Required Mounting Plates
9) All Required Roll Cage Saddles
10) Full VAT invoice
11) Full Compliance Certificate for Scrutineer Pack
The Roll Cage is produced to comply with Motorsport UK annually published 'Blue Book' regulations
(for more information on motor sport regulations please visit the Motorsport UK Association Limited website).
As we produce everything in house we can do anything you require. If you would like the cage fully welded in or fully bolt in or a mixture of weld in/bolt in this is not a problem and there is no extra cost. If you want additional optional members or more mounting points then we are happy to do this at an extra cost.
We use a 60 ton press to form all the roll cage saddles (38, 45 and 50mm OD). We use our own in house 3D modelling software to design and develop the cage. We use a CNC tube bender to manufacture all the bent components. We use a 3 axis tube notcher to scallop the tube. The only parts we buy in pre made are the nuts, bolts and washers! We are a one stop shop for all you roll cage requirements.
We can make this cage in either of the following sizes,
44.45mm OD x 2.64mm Wall CDS Steel Tube
or
50.8mm OD x 2.03mm Wall CDS Steel Tube
Each size is bent on the following radius,
44.45mm OD – 139.7mm CLR
50.8mm OD – 165.1mm CLR
All material is BRAND NEW AND UNUSED Cold Drawn Seamless (CDS) Steel
MATERIAL SPECIFICATION – Cold Drawn Seamless Steel – Specification - EN 10305-1 (Previously BS6323 Part 4, CFS3 BK, BS980 CDS2) Minimum Yield Strength - 350 N/mm2
All our roll cages are manufactured using CDS (cold drawn seamless) tube, exceeding the minimum requirements set out by the Motorsport UK Association Limited and FIA regulations. Do not confuse CDS with inferior blue band or steam pipe used by some other manufacturers, CDS is stronger, lighter, better to weld and specifically manufactured for use in roll cages.
We have in stock all types of roll cage tube from standard CDS up to T45 and Chrome Moly and can supply this by the metre if required. Please see the items in our eBay shop.
All bends are produced on a market-leading and numerically controlled industrial rotary draw bending machine, which is accurate to +/- 0.1 of a degree. The dies used to manipulate the tube are fully machined, from a single billet of A36 low carbon steel or 1018 mild/low carbon steel depending on the CLR. The counter die uses a 954-C aluminium bronze head with a UHMW plastic slide. Using fully-machined dies (as opposed to cast dies) produce far superior quality bend.
If you have ANY QUESTIONS then PLEASE message us via eBay or alternatively email us before buying. We will be more than happy to answer them!
Please feel free to send any bespoke drawings through to us – we have over 11 years experience creating custom projects/applications. We can then put your project item on eBay with the agreed price so you can complete your purchase using ebay seller protection.
PRICE GUARANTEE
Tube Bender Limited will not be beaten on price, whether it’s for one, 10, 100 or 1,000 parts! If you can email us over a quote you have received or a link to a price you have seen – we can guarantee to beat it by at least 10%!
Disclaimer: Please note your vehicle must be delivered to our premises suitably stripped out and ready to receive the roll cage. So please ensure all sensitive parts or components are removed or safely protected against possible damage (it they cannot be removed). It is always best practise to intstall your roll cage at the earliest opprotunity before commencing your build project. We cannot be held responsible for any damage caused during intstallation including damage caused by weld splatter, heat or smoke.