Description
KnuKonceptz Fused Battery Terminal - Pair
The KnuKonceptz FBT-40P combines two functions, a battery terminal and in line fuse holder, into one product. Our engineers have cut a traditional battery terminal in half, insulated the two parts from each other, and linked them with two Mini-ANL fuses to create an all in one fused battery terminal.
Listing Includes:
Positive Battery Terminal with Cover and Two 150A Fuses (300A Total)Negative Battery Terminal with Cover
Specifications
FBT Battery Terminal Pair |
|
---|---|
Finish | Nickel Chrome |
Outputs |
+ Two Fused / Two Non Fused (includes Three 0 gauge and one 4 Gauge fitting) - Four Non Fused Ports (Three 0 Gauge and one 4 Gauge Fitting) |
Dimensions |
3.70” (W) x 2.375” (H) x 1.30” (D) with cover in place |
Warranty |
1 Year |
Insulated Cover Included |
Yes |
Additional Information
Half Insulated / Half "Hot"
Each FBT-40P has two halves, each with two ports. One half is separated from your battery with the use of an insulator and is ONLY connected via the fuses from the "hot" or constant side. Each of side of the FBT-40P has two compression fitting outputs that accommodate 0, 2 or 4 gauge battery cable.
The fused side should be used for connecting your accessories while the non fused side must be connected to the vehicles factory wiring. Speaking of factory connections, the FBT-40P allows access to your OEM battery terminal via our TPA-POS terminal (sold separate). Some simple modification to the FBT-40P smoked poly carbonate cover is required to allow access to this port.
The KnuKonceptz FBT-40N is the negative match to our FBT-40 Fused Battery Terminal. Specifically machined for the negative battery post, the FBT-40N has 4 non-insulated compression ports. From the factory three of these ports accept 0 gauge and one port accepts 4 gauge.
Compression Fitting Connections
Our compression fitting termination offers the highest level of surface contact area. Better connection means less resistance, which equals higher voltage to your system. These compression fittings also allow for multiple gauges to be used without any product modification.
Installation is simple, remove 5/8" of jacket from your cable. Insert the cable through the compression fitting. Screw fitting into place and tighten with a wrench (Do not use pliers, damage to fitting may occur). .