New Scotts Performance SUB Mount /Complete Stabilizer Kit /Solid Mount type /using stock triple clamps (utilizes handlebar position 3 & 4). # DS-SUB-5928-01.
This kit fits:
This kit is designed to be used with the stock triple clamp and oversize handlebars. The SUB mount shown here in black, bolts to the stock triple clamp. The stock lower perches then bolt to the SUB mount allowing the stabilizer to slip in under the bars. Your model may have black or Silver triple clamps depending on the bike. The SUB mount will raise the bars 25mm and allows the bars to be run in positions #3 and #4. Positions #1 and #2 can not be used. The cable guide and large knob in this photo are optional and not part of the basic kit.
Sub Mount information:
"SUB" mount stands for Stabilizer Under Bars, originally designed for
raising the bars. These kits are designed for use with Oversize bars.
"Bar reducers" are available as an option, to convert the kit to
standard diameter bars, should that be desired. This concept allows
more room for other equipment such as, Global Positioning Systems(GPS)
or Enduro/Rally computers and yet still retain the quick access for
adjusting the stabilizer. This is also good for the taller rider who
wants his bars a little higher, as it raises the bar location
approximately 11-25mm, depending on the model of bike. In some cases,
you might consider a lower bend handlebar bend at the same time, unless
you are trying to achieve a higher bar height along with your stabilizer
installation. We can also help you with other handlebar choices
to match your desired setup, as we have a full selection of handlebars to
choose from at MX1WEST.com. The SUB mounts are only available on certain models
based on the physical limitations of mounting in this area. Each SUB mount
comes complete with all necessary parts, hardware and “Step by Step” pictured
instructions. If you have any questions, feel free to call or email us at
707-664-9089.
This kit includes: