This listing is for the

- KK4HXJ -

Deluxe Knight KG-620 Series assembled test probe set

Fits Knight KG-620 and 83Y125 meters

There are 3 seperate test leads required for this meter:

One probe is for DC Measurement (Genuine Switchcraft 2501F Connector - RG174 Coax Cable to a Black Test Probe with 1 Meg ohm 1/2 Watt Resistor) + Hot Glue Injected Strain Relief in Test Lead and Microphone Connector

One probe is for AC/Ohms Measurement (Red Pin Tip Plug - Red Test Lead wire to Red Test Probe )

the 3rd lead is the ground lead (Black Pin Tip Plug - Black Test Lead Wire to Alligator Clip.)

The unit is presented in a Labeled, Retail Quality, Reusable, 4 Mil Poly Ziplock Bag and is wrapped with a Reusable Velcro Strip to keep the leads organized and ready

This is hand assembled by me using the following components:

1 Pair of Test Lead Probes - 1 Red/1 Black - Genuine Philmore 912/913J Probes

1 Genuine Switchcraft 2501F Microphone Connector

1 Meg Ohms of Resistance

1 Alligator Clip & Heat Shrink Tubing

2 Laminated Self Adhesive Probe Labels and Clear Heat Shrink Tubing to cover the probe labels, resulting in a professional and durable setup (see photos)

1 36" length of RG174 Coaxial Wire for DC Lead (Very Flexible - makes a great test lead) 

1 36" Length of 18 Gauge Black Rubber Test Lead Wire (PowerWerx brand Very Flexible - High Quality) for the Ground Lead

1 36" Length of 18 Gauge Red Rubber Test Lead Wire (PowerWerx brand Very Flexible - High Quality) for the AC/Ohms Lead

2 Genuine Johnson-Cinch Pin Tip Plugs

The original instructions specify shielded cable for the DC lead, the original supplied wire was a coaxial microphone style wire, many people use either standard (unshielded) test probe wire for the leads or a shielded coaxial cable, I Supply a 36" piece of black RG174 for the DC lead, a 36" piece of  Red test probe wire for the AC/Ohms lead and a 36" piece of black test probe wire for the ground