MPR121 Breakout V12 Capacitive Touch Sensor Controller Module I2C keyboard
This is a breakout board for Freescale's MPR121QR2.
The MPR121 is a capacitive touch sensor controller driven by an I2C interface.
The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode.
The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes,
they may be used to drive LEDs.
There a four jumpers on the bottom of the board, all of which are set (closed) by default.
An address jumper ties the ADD pin to ground,
meaning the default I2C address of the chip will be 0x5A.
If you need to change the address of the chip (by shorting ADD to a different pin),
make sure you open the jumper first. Jumpers also connect SDA,
SCL and the interrupt pin to 10k pull-up resistors.
If you don't require the pull-up resistors you can open the jumpers by cutting the trace connecting them.
There is no regulation on the board, so the voltage supplied should be between 2.5 and 3.6VDC.
The VREG pin is connected through a 0.1uF capacitor to ground, which means,
unless you modify the board, you can't operate the MPR121 in low-supply voltage mode (1.71-2.75VDC).
Size:3cm x 2cm .
 
 
Package Include:
 
1 x New MPR121 Breakout V12 Capacitive Touch Sensor Controller Module I2C keyboard

  • If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
    We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.

  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
  • 1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
    2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
  • EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
    Payment must be received in 5 business days of auction closing.
    Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

* When you satisfied with our product and services please leave us positive feedback.

* If you have got the package, please confirm "Delivery on time" For us.

* If a problem occurs, contact us immediately with any email request.

* Just contact us using the " Ask the seller a question" link on eBay.

Am 02.09.21 hat der Verkäufer die folgenden Angaben hinzugefügt:

DataCaciques