Neu 13,56Mhz RFID RC522 Proximity Modul Reader IC Karte S50 Kit Set ID Key Tag
RFID IC Key Tags
Main Chip: Philips 1 S50;
Storage capacity: 8Kbit, 16 partitions, each partition with 2 grounp passwords;
Size: 30 * 40 * 3mm;
Operating Frequency: 13.56 MHz;
Communication speed: 106K Boud;
Read and write distance: 2.5 ~ 10cm;
Read and write time: 1 ~ 2ms;
Operating Temperature: -20 ℃ ~ 85 ℃;
Endurance:> 100,000 times;

Typical applications:

enterprise / campus card, bus stored value card, express way fees, parking, district management,attendance systems, patrol system, enterprise systems, access control systems, radio frequency identification field and so on.
 
Package Included:5 * RFID IC Keyfobs Key Tags Token NFC TAG Keychain 13.56MHz Arduino
Thin Smart Card
 
This card is compatible with NFC capable phones and tablets, it is Smart Card Tags.

You can do many tasks use this tag, such as set an alarm, turn phone to silent etc.
If you don't know how to use it,please search YouTube to see.
There are many free applications on internet, so you can program very easy.

100% brand new and high quality
Frequency: 13.56 MHz
Size: 85mm x 54mm x 0.9mm
Material: PVC, Waterproof
IC tag is suitable for 13.56MHz ISO14443A S50 card reader and reading distance is 0 - 10cm
(Reading distance depends on readers, not the cards)
User definable access conditions & password for each memory block
1K byte EEPROM memory (768 FREE BYTES availability)
Organized in 16 sector with 4 blocks of 16 bytes each (one block consists of 16 byte)
Write endurance 100,000 cycle
ISO standards :ISO 14443 / 14443A
Prefect support for:
Xperia™ P, Xperia™ S, Xperia™ sola,
HTC One X,
LG Prada 3,
Panasonic Eluga,
Samsung Galaxy Nexus, Samsung Nexus S, Galaxy S 3, Note 2, etc....

Package included：5 * Thin Smart Card
13.56Mhz RFID Module

Model: RC522
Sleep Current：<80uA
Peak current：<30mA
Operating Frequency：13.56MHz
Read Range：0～45mm
Interface：UART TTL
Baud Rate：115200
Data transfer rate：Maximum10Mbit/s
Physical Characteristics：Size：50mm×50mm
Ambient operating temperature：Celsius-20—80
Storage Temperature：Celsius-40—85
Humidity：Relative Humidity 5%—95%
Agreement：Compliance with ISO14443A standard，support S50、S70
Package included：1PCS

RC522 Unit
The MF522-AN module the the original Philips MFRC522 chip design circuit card reader, easy to use, low cost, and applies to the user equipment development, the reader and the development of advanced applications, the need for the user RF card terminal design/production. This module can be directly loaded into the various reader molds. Utilizes a voltage of 3.3V, through the SPI interface simple few lines directly with any user CPU motherboard connected communication can ensure that the module is stable and reliable work, distance card reader.
Electrical parameters:
1. Operating current :13-26mA/DC 3.3V
2. Idle current :10-13mA/DC 3.3V
3. Sleep current: <80uA
4. Peak current: <30mA
5. Operating Frequency: 13.56MHz
6. Supported card types: S50, S70
7. Product physical characteristics: size: 40mm×60mm
8. Environmental Operating temperature: -20-80 degrees Celsius
9. Environmental Storage Temperature: -40-85 degrees Celsius
10.Relative humidity: relative humidity 5% -95%
11.Module interfaces SPI Parameter
12.Data transfer rate: maximum 10Mbit/s
Package included：1*RC522 Unit


13.56MHz RC522 Antenna RF Module
MF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip, NXP launched by the company for the "table" application of a low-voltage, low-cost, small size of the non-contact card chip to read and write, smart meters and portable handheld devices developed better choice. The MF RC522 use of advanced modulation and demodulation concept completely integrated in all types of 13.56MHz passive contactless communication methods and protocols. 14443A compatible transponder signals. The digital part of to handle the ISO14443A frames and error detection. In addition, support rapid CRYPTO1 encryption algorithm, terminology validation products. MFRC522 support series of high-speed non-contact communication, two-way data transmission rate up to 424kbit/s. As new members of the 13.56MHz reader card series of highly integrated chip family, MF RC522 MF RC500 MF RC530 There are a lot of similarities, but also have many of the characteristics and differences. Communication between it and the host SPI mode helps to reduce the connection narrow PCB board volume, reduce costs.
RFID module:
The MF522-AN module the the original Philips MFRC522 chip design circuit card reader, easy to use, low cost, and applies to the user equipment development, the reader and the development of advanced applications, the need for the user RF card terminal design/production. This module can be directly loaded into the various reader molds. Utilizes a voltage of 3.3V, through the SPI interface simple few lines directly with any user CPU motherboard connected communication can ensure that the module is stable and reliable work, distance card reader.
Electrical parameters:
1. Operating current :13-26mA/DC 3.3V
2. Idle current :10-13mA/DC 3.3V
3. Sleep current: <80uA
4. Peak current: <30mA
5. Operating Frequency: 13.56MHz
6. Supported card types:  S50,  S70 
7. Product physical characteristics: size: 40mm×60mm
8. Environmental Operating temperature: -20-80 degrees Celsius
9. Environmental Storage Temperature: -40-85 degrees Celsius
10.Relative humidity: relative humidity 5% -95%
11.Module interfaces SPI Parameter
12.Data transfer rate: maximum 10Mbit/s
Package included：1 x RFID 13.56MHz RC522 Antenna RF Module 

  • If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
    We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.

  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
  • 1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
    2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
  • EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
    Payment must be received in 5 business days of auction closing.
    Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

* When you satisfied with our product and services please leave us positive feedback.

* If you have got the package, please confirm "Delivery on time" For us.

* If a problem occurs, contact us immediately with any email request.

* Just contact us using the " Ask the seller a question" link on eBay.

Am 02.09.21 hat der Verkäufer die folgenden Angaben hinzugefügt:

DataCaciques