Fix 51574 or 51594 Blower 10.5-AMP Motor New Carbon Brush Set

For 51574 blowers with 10.5-amp motors that need 1/4 x 1/4 inch size bushes.

Note: Please check your blower brushes that this is the correct size for your blower (Toro uses different sizes sometimes with the same model Number blower)

Bring your Toro back to life!

Replacing brushes and cleaning commutator early can prevent damage to motor armature.

Product Application

·       Electric motor brush can be used as a replacement for many power tools with 8mm brush see (Dimensions below)

·       To use; remove old brush, Cut copper wire close to old brush, 'Tin' wire lead end and solder, Seat Brushes as shown, Clean armature as needed, re-assemble, and run blower to seat brushes.

·       This brush is compatible with Toro model 51594 10.5 Amp motor

If You have a 7-Amp Toro please see add:

Fix Toro 51585 or 51586 Power Sweep Blower 7-AMP Carbon Brush Sets Toro (7A-7E)

https://www.ebay.com/itm/232545925909


Replacement carbon brushes are NOT AVAILABLE from Toro®

·       Fix it yourself, eliminating waste, and unnecessary expense.

☛ ·       Buy two sets now with discounted shipping, the right size brush is hard to find and you'll have them for next time

Description

·       Carbon motor brushes

·       Most commonly replaced power tool components

·       Replacing brushes early can prevent damage to motor armature

·       Often the cause of a poorly running motor

·       Replacing brushes can fix an intermittent motor

Product Specification

·       Product Name : Carbon Brush

·       Fitness of use : Generic Electric Motor

·       Carbon Brush Size (Approx): 6.3 x 6.3 x 18mm (H*W*L)

·       Copper Wire Length (Approx) : 29mm

·       Material : Carbon Graphite

·       Tinned : Solder

·       Color : As Picture Shown

·       Net Weight : 2g (each)

·       Package Content : 2 x Carbon Brush

Specification:

Product Name

Motor Carbon

Fitness

Generic Electric Motor

Carbon Brush Size (Approx)

6.2 x 6.3 x 18mm (*L*W*H)

Copper Wire Length(Approx)

29mm (When Straight)

Material

Carbon Graphite

Weight

2g (each)

Package Content

2 x Motor Carbon Brush

 

 

1) Warning! - Remove Power, turn-off, and disconnect power before changing brushes.

 

2) Warning! - For safety always follow manufactures safety and operational instructions.  

 

* Please return a positive review for good service, Thank You.

© 2015-2022 Draco Products. All Rights Reserved

Toro® and Vac®  are registered Trademark of The Toro Company. Draco Products is not affiliated with The Toro Company.