Aquafilter 20” Whole House Big Blue Filtration System

HHBB20B

Systems consist of Big Blue ® filter housings to meet all customer large-capacity filtration needs. The systems are dedicated for high flow, cold water on commercial and industrial applications. The housings are compatible with a 4 1/2” x 20" type cartridges widely available on the market. Filter housings consist of housing sump and filter head with 1" brass inlet/outlet inserts. Heads are equipped with a pressure relief valve (providing ability to release air bubbles collected during cartridge replacement procedure) and two pressure gauges (providing pressure drop monitoring). This configuration enables the measurement of the pressure drop at the inlet and outlet connections. In addition, brass inlet/outlet inserts enable damage-free installation of pressure relief valve and pressure gauges.

System is equipped with either 20" Big Blue ® filter housings in blue color, which protect filter cartridges against the phenomenon of algae growth in case the system is installed in a sunny location. The new innovative design of filter housing sumps has a more rounded bottom, which significantly increases resistance to stress (based on burst tests). The housings are equipped with pressure relief valves which allow the release of residual air trapped in the filter after replacing the cartridge. Depending on level of water contamination, system can be configured with sediment and carbon or specialty Big Blue® type cartridge

Product features:

● High quality

● Competitive Pricing
● Hand Built & Factory Tested
● Equipped with antibacterial and antimicrobial filter centralizing ring
● Ideal for family use as POE
● Easy to connect to cold water inlet
● Easy to install, No Electricity, No Drain Required
● Heavy-duty filter housings
● Full flow 1"ports
● Large capacity housing suitable for high flow applications
● Pressure relief/bleed on inlet side of cap
● Compatible with most 4 1/2" x 20" type cartridges available on the market
● Housings are NSF approved for structural integrity and material requirements
● Easy to install with System Specifications
● Manufactured from FDA CFR-21 compliant materials
● Made in EU with High Performance Components

Specifications:

● Housing: PP
● Cap: PP
● Inserts: brass
● Pressure relief valve: brass
● No. of pressure gauge: 2
● O-ring: NBR
● Operating Pressure: 6 bar (90 psi)
● Minimum Temperature: 2ºC (35ºF)
● Maximum Temperature: 45°C (113°F)
● Dimensions (H x W x L) HHBB10B: 720mm x 540mm x 220mm
● Cartridge dimensions HHBB10B: 20" x 4 1/2" (508 mm x 115 mm)

System includes:

1 x metal platform

3 x big blue type filter housings (20")

2 x pressure gauges (inlet & outlet) with nickel extension to the pressure gauges

3 x antibacterial and antimicrobial filter centralizing ring

1 x full instructions

1 x wrench

POSTAGE

PAYMENT

Contact Us

We make every attempt to despatch goods as soon as payment is received. Goods ordered before 1pm will be sent out on the same day. Our couriers deliver from MON-FRI, anything ordered at weekends or bank holidays will be posted on the following working day. We will only ship to PayPal's Confirmed Address. Contact us first if local pick up is preferred.

If you require delivery to the Scottish Highlands & Islands, Isle of Man, Scilly Isles, Channel Islands, Northern Ireland or outside of the UK mainland please contact us for a postal quote before making your purchase.

We will accept payment by PayPal (all transactions under £500) or personal / business cheques. Payment is only accepted in Sterling (GBP). Buyers outside of the UK are responsible for any duties, local taxes and charges due. Please complete checkout and send payment within 48 hours of completing a purchase. We provide invoices with VAT separately displayed.

We pride ourselves on our high standards of customer service and want you to be happy with your purchase. 

If you have any comments or you are experiencing any problems with your order, please do not hesitate to contact us.

REFUNDS / RETURNS

We will gladly refund the full payment amount (excluding carriage charges) if you are at all dissatisfied with an item or find it is not suitable for the purpose you bought it for as long as the item is returned in its original condition and unused within 30 days of receipt. We cannot refund the original outgoing carriage charge and also reserve the right to deduct a maximum of 15% handling charge for items that have been ordered in error. Return carriage charges have to be at the buyers expense and items must be sent recorded or secure delivery to enable a full refund. All items are sold with a thirty day warranty against manufacturing defects unless otherwise stated in the items description on the main listing. Any items returned as faulty will need to be supported by a detailed report from a qualified person stating the exact nature of the fault. We will not accept warranty claims for DIY fitting of components by none trained persons. Returned items will be inspected by our own qualified engineers or returned to our supplier for inspection. Items that have been unpacked and fitted and are not in the original re-saleable condition will be returned to the buyer and no refunds will be given. We reserve the right to offer either a replacement part or a full refund for returned items. Please contact us before returning any items, we always try to help customers and a friendly honest service is assured.

DISCOUNTS AVAILABLE ON MULTIPLE PURCHASES

WHOLESALE

FOR MORE INFORMATION CONTACT US