Micro 6V-12V DC Brushless Water Pump Small Submersible Pump 3.7W 230LPH 1.8M Mini Size



Amphibious, land use or diving

Mute (Ultra Low Noise) 30dB within 10cm

Surprisingly Powerful in so mini size 4.36cm*2.88cm*2.8cm

Power Saving with just 3.7W at 12Vdc

Can be used for High Temperature fluids pumping when land use

There are ROSH/IP68/CE/EMC Certifications of pump products.

This pump product, with ceramic shaft and ceramic sleeve, ultra-quiet and eco-friendly. The consecutive life expectancy of can be over 10,000 hours. Amphibious use(Soaking or not). Non-self-priming, water should be able actively flow into inlet of pump at land use connecting with outside pipe. Long time work without fluids inside pump can be damageable.


Typical features:

Operating voltage: 6-12V (voltage more than 12V is not advised), current 310mA at 12Vdc, Max static head 1.8 meters, Max horizontal flow 230L / H. (Ultra power saving)

Materials: Pump body with high-temperature-proof plastic material. The sleeve and shaft with high-strength ceramics. (Note: usually common pump only with the ceramic shaft, without ceramic sleeve)
Structure: with three suction cups on the bottom, can be arbitrarily fixed on a smooth surface.
Power cord: diameter 3.0MM waterproof round wire length of 0.5 meters.Brown is Postive, Blue is egative. Auto-protection when reverse connected.
Product size: 43.6mm*28.8mm*28mm (including water inlet and outlet)
Pump outlet diameter: OD 7.79MM
Pump inlet diameter: OD 8.20MM
Suitable medium: water, oil, and other acid-base solution. (Land use when pumping acidic liquids, submersible installation is not advised at this case)
Max Operating Temperature: resistance to high temperature of 80 degrees. Pumps can dive at room temperature, land use (not soaking) at high temperature(>70C). (Pump body material itself can be resistant to 200 degree Celsuis) Of course, continuously working under high temp. >80C is not advised.
Usages:  Mainly used for mini solar fountain, equipment water cooling, medical use, coffee maker, etc.

Cautions - some notes you must pay attention before your purchase!

1, OVER-VOLTAGE is strictly prohibited. Otherwise, pump will be burnt and cannot be fixed anymore.

2, As micro brushless dc pump, it works via electronic commutation while not brush friction, so there exists no loss caused by brush friction. Pump works with relatively high efficiency. stator part is completely potted inside pump body with epoxy material and control circuit part is potted inside control box, completely physically separated from external fluid environment and completely waterproof.

3, Pump supports continuous long time work with relatively low noise at normal working environment.land use or submersible installation can be both OK, but it cannot be self-priming, just make sure that fluid can actively flow passing through inlet/outlet because pump works via centrifugal force of high-speed rotation of impeller inside (push/throw fluid out). No long-time dry work without fluid, or it may damage the pump.

4, Pump can be suitable for high temperature fluid circulation application: note that when temperature is over 60C, the control box of pump is advised to be located in normal temperature environment for stability & reliability of electronics components inside control box, while pump body itself is of course OK to be located at high temperature fluid environment.

5, about power polarity: BROWN/ RED is Positive, BLUE/ BLACK is Negative. Matching DC power supply. DIRECT AC POWER CONNECTION is PROHIBITED!

6, to avoid possible misunderstanding of relevant parameters, here we also say something about flow rate value & max static lift value of pump products: 

For static lift value, it means the max vertical height of flow column when outlet is connected with external matching hose/tube, when pump works at rated voltage.

For max flow rate value, it means the max flow rate of pump at horizontal level, when pump works at rated voltage. The higher the height, the lower the flow; when height reaches lift value, flow rate becomes zero.

Note that lift value and spraying/shooting height of pump are completely different. So dear users, please do not be confused by them.

Meanwhile, certain deviation of around +-10% is advised to be left when in relevant applications, to leave enough margin.

7. Pump is NOT suitable for direct solar panel powering because it requires a startup voltage while solar panel cannot provide immediately; instead, it demands a charging battery or voltage stablizer as buffer when being powered by solar panel.



Shopping

1. Please make sure whether item(s) you want to order is/are the right one(s) you need and we do advise that customer friends pre-contact us about relevant issue if you are not sure, to avoid possible extra waste caused by inappropriate choice.

2. Import duties, taxes and charges are not included in item price or shipping charges and Customs clearance are buyer’s responsibility. Please check with your local Customs authorities before purchase.


Payment

1. We accept direct order payment on eBay itself.

2. Bulk orders can be accepted. Products are always full in stock, or can be customized for specific requirement after communication



Shipping

1. Your item(s) will be shipped out within 1-2 business days after order payment has been successfully verified on eBay platform.

2. In order for us to have PayPal seller protection, we only ship to address shown in your PayPal payment. We DO NOT ship to any other address requested by email or eBay message.

3. We will pack your item(s) carefully and safely to avoid any damage during transmit; each package has its own tracking No., which will be provided on eBay platform.

4. For ‘Standard Int'l Shipping’, default shipping will be via China Post or Hongkong Post (if package contains battery inside, default shipping will be via Netherlands Post: Hongkong->Netherlands as transit->destination country). For ‘Expedited Int'l Shipping’, default shipping will be via DHL, Fedex, Aramex or EMS, which depend on each specific case. Note that delivery times may vary, especially during peak periods.


Return Policy

1. We have 30 days’ warranty for money back. Refund will be issued after returning item has been received.

2. It’s buyer’s responsibility to contact us about replacement or refund issue within 30 days after defective item has been received; otherwise, we have to reject it. Buyer is responsible for return shipping cost in any cases.

3. All return items must be in original condition, in original boxes, and with all paperwork, parts and accessories; We are not responsible and do not accept any damaged return items. Buyers must pack the return item safely; Please note that your original shipping costs will not be refunded.


About Us

We are always aiming to provide you with nice products and services, as nice as we can. So if you meet with any problem or requirement, please don’t hesitate to contact us!

We are always here, just waiting for you.