HP ProCurve 2610-48 48 Port Layer 3 Managed 10/100 Ethernet Switch W/ 2x Gigabit Ports & 2x SFP Uplinks with rack brackets
Model: J9088A
Specifications:
Ports
48 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX)
Media Type: Auto-MDIX
Duplex: half or full
1 RJ-45 serial console port
2 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
2 open mini-GBIC (SFP) slots
Physical Characteristics
Dimensions: 9.3(d) x 17.4(w) x 1.73(h) in. (23.62 x 44.2 x 4.39 cm) (1U height)
Weight: 10.75 lb. (4.88 kg), Fully loaded
Memory and Processor
MIPS @ 300 MHz
16 MB flash
128 MB SDRAM
Packet buffer size: 2 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Performance
100 Mb Latency: < 6.2 µs (LIFO)
1000 Mb Latency: < 4.4 µs (LIFO)
Throughput: up to 13.0 million pps
Routing/Switching capacity: 17.6 Gbps
MAC address table size: 8,000 entries
Environment
Operating temperature: 32ºF to 122ºF (0ºC to 50ºC)
Operating relative humidity: 15% to 95% @ 104ºF (40ºC), non-condensing
Non-operating/Storage temperature: -40ºF to 158ºF (-40ºC to 70ºC)
Non-operating/Storage relative humidity: 15% to 90% @ 149ºF (65ºC), non-condensing
Altitude: up to 10,000 ft. (3 km)
Acoustic: Power: 45 dB, Pressure: 36.2 dB; DIN 45635T.19 per ISO 7779
Electrical Characteristics
Achieved Miercom Certified Green Award
Maximum heat dissipation: 285 BTU/hr (300.67 kJ/hr)
Voltage: 100-127 / 200-240 VAC
Current: 1.3 / 0.8 A
Maximum power rating: 66 W
Frequency: 50 / 60 Hz
Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.