ObsidianWire Solder-less Wiring Upgrade~Custom Blender for Strat® 500k~Brand New





                             
With the ability to blend your neck and bridge pickups together, The ObsidianWire Custom Blender Harness is a great way to add tonal diversity to your Fender® Stratocaster®. Wind the blender control back, and you regain the traditional five switch positions you love.

Best of all, ObsidianWire Pro-Wired Electronics are super easy to install, and allow for unlimited solder-less pickup changes with Plug, Play and Enjoy connectors.

The Magic of the Custom Blender Harness:

With a master volume and master tone control the Custom Blender Harness packs your traditional Strat® tones into a smaller space, leaving the third tone control free.

This becomes the blender control, adding the ability to blend the neck and bridge pickups in together. This is amazing for adding a range of musical mids to your lead tone (like the bell like effects David Gilmour gets in his signature Strat) or for adding some twang to your rhythm, just like you find in the middle position on a Tele®. When you need a complete wall of sound, you can even mix all three pickups together by flicking the five way switch to position 2 or 4.

With Blender Control On:

1:Bridge Pickup + Neck Blended in
2:Bridge & Middle Pickup + Neck Blended in
3:Middle Pickup
4:Neck & Middle Pickup + Bridge Blended in
5:Neck Pickup + Bridge Blended in

When it is time to ease back to your traditional positions, simply roll the blender knob off, and it will remove itself completely from the circuit. This returns your neck, middle and bridge pickups back to the vintage positions we all know and love

With Blender Control Off:

1:Bridge Pickup
2:Bridge & Middle Pickup
3:Middle Pickup
4:Neck & Middle Pickup
5:Neck Pickup

To make your tone crystal clear at lower volumes we also include an ObsidianWire Custom Spec Treble Bleed Mod. This prevents tone 'muddiness' at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control.

We build ObsidianWire Pro-Wired Electronics using the world’s best craftsmanship and components:

  • 2 x Obsidian Select Pots (Crafted by CTS) 250k or 500k (+/-6%) (Matched to +/-2%) SPLIT SHAFT
  • 1 x Obsidian Select CTS Blender Pot 250k (+/- 10%) SPLIT SHAFT
  • 1 x Genuine Oak Grigsby 5-Way Switch
  • 1 x Genuine Switchcraft J11 Mono Output jack
  • 1 x Obsidian Select Capacitor (150 Series Polyester Film 0.047uf or 0.022uf) (Hand Tested to +/-10%)
  • 1 x Obsidian Select Volume Mod / Treble Bleed - Improved Volume Taper & Clarity
  • 1 x Pre Printed & Easy to Follow Wiring Diagram

Compatibility:

ObsidianWire Pro-Wired Electronics for Strat, are designed to be a direct fit for American and Mexican series Fender Stratocasters. We cannot guarantee that these will fit any other guitar.

These are also excellent upgrades for Japanese Fender & Squier Guitars with some adjustment. In the least you will need to widen the holes in the pick-guard out to around 3/8" or 10mm & get new US spec control knobs for the higher grade electronics.

At ObsidianWire we use US spec, 24 spline, split shaft controls. Using theincorrect size knobs can, and will damage your controls. We recommend that you check your knobs are the correct size and replace them if necessary. If your knobs do not press on easily, slightly crimp the top of the pots shaft together to improve the fit.




We accept all major credit cards (Visa,Mastercard,Discover & American Express) through Paypal.Payment due within 3 days of auction end.




Shipping will be done within 24 to 48 hours upon receiving cleared payment excluding holiday`s & sunday`s.We ship by USPS & Fedex & provide a confirmation email with the tracking number for U.S.A. and International buyers.Make sure your mailing address and your Paypal email address are up to date.Large Priority Mail has a 66 pound weight limit.The more items you buy with this method the cheaper the shipping cost.Use the drop down menu which will "Calculate" the shipping cost.We have a 5 day time frame for combining items to be shipped together.We use the total weight to determine the shipping cost which saves on shipping costs.USA  items marked as FREE shipping are not calculated.

Priority Mail & Express Mail Flat Rate Envelope has a 4 lb weight limit.I can combine items into one package without any additional cost for 5 days provided that all of the combined items are under 4 lbs & can fit into the Priority or Express Mail envelope.You will be notified when the envelope limit for items has been reached.

Wait for the invoice to be sent to you which will reflect the correct shipping cost.Any item or combination of items over the weight of 13 ounces (U . S . A )will automatically convert to shipping by Priority Mail.




Item details & information is on each auction listing and in the "Ask seller a question" faqs.We are not techs/luthiers so if you have technical/parts related questions an internet search will guide you to the correct forums.




Electricguitarparts is a Fender and FMIC subsidiaries authorized dealer.Dealer name: Ultimate Music Direct.We do not dropship,We only list items that are in stock at our location.




In the event a defective item,the wrong item or the item hasnt been delivered within a reasonable time frame please contact us immediately.


Images sell!
Get Supersized Images & Free Image Hosting
Create your brand with Auctiva's
Customizable Templates.


Attention Sellers - Get Templates
Image Hosting, Scheduling at Auctiva.com.