• Silicone Adhesive Backed.
• 33m Long Reel, Backing Thickness - 0.025mm, Tape Thickness - 0.060mm.
• High-Temperature Kapton Tape - Heat Resistant Maximum Temperature 260C.
• Suitable for applications such as PCB Masking, High-Temperature Clamping, Keypad and Membrane Switch Applications, Surface Protection, Splicing of Silicone Papers and Films, Powder Coating Masking and Electroplating.
• Colour - Amber.

12mm Wide High-Temperature Polyimide Masking Tape

Applications: PCB Masking, High Temperature Clamping, Keypad and Membrane Switch Applications,Surface Protection, Splicing of Silicone Papers and Films, Powder Coating Masking andElectroplating.

Features:Employs a proprietary technology that results in extremely low electrostatic discharge at unwinding and removal from SUS. Conventional polyimide tape typically generates over 10,000 volts during use which can damage electronic components. The low static properties of our Kapton Tape can eliminate circuit board degradation.

Storage Environment: Store under normal conditions of 10C. to 30C. and 40 to 70% relative humidity in theoriginal packaging.

Key Specifications

Technical Data:

Backing Thickness_ 0.025mm

Total Tape Thickness_ 0.060mm

Adhesion to Steel: 1.4N/cm Test method GB-T2972

Tensile Strength at Break: 58N/cm Test method GB-T7753

Elongation at Break: 60% Test method GB-T7753

Upmost use Temperature: 260C

Surface Resistance: 10 6~8 ohms

Removal from roll: <100V

Static Charge:

FromSUS: <50V

Dielectric Strength: 4000 Volts Test method GB/T7752-87

Thermal Conductivity: ?0.12 W/m.K

Product Contains

Ingredient C.A.S. No % by Wt

Polyimide Backing 25038-81-7 99.40%

MQ Resin 56275-01-5 0.42%

Siloxanes and Silicones 68083-14-7 0.18

Not classified as hazardous to users.