Fluke T5-600  Electrical Tester / Clamp Meter

The Fluke T5-600 Electrical Tester/Clamp Meter lets you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw™ current lets you check current up to 100A – without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach™ test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. 

Fluke T5-600 Technical Specifications

Specifications
Jaw opening12.9 mm (0.5 in)
Max wire size1/0 THHN Cable
Current range ac rms0 to 100.0 A
Accuracy ac current (50/60 Hz)3 % ± 3 counts
AC ResponseAveraging
Voltage range ac0 to 600 V
Accuracy ac voltage1.5 % ± 2 counts
Voltage range dc0 to 600 V
Accuracy dc voltage1 % ± 1 count
Resistance range0 to 1000 Ω
Continuity beeper thresholdOn at <25 Ω, off at >400 Ω
Volts indicator LED thresholdGuaranteed on by 30 V ac

 

Environmental Specifications
Operating Temperature-10 °C to 50 °C
Storage Temperature-30 °C to 60 °C
Humidity (Without Condensation)0 % to 95 % (5 °C to 30 °C); 0 % to 75 % (30 °C to 40 °C);
0 % to 45 % (40 °C to 50 °C)
Dust/water resistanceYes
Operating Altitude2000 meters max
Temperature Coefficient0.1 x (specified accuracy)/°C (<18 °C or >28 °C)

 

Safety Specifications
Overvoltage categoryCAT III 600 V ac/dc (EN61010-1)
Agency ApprovalsUL, CSA, and VDE
Maximum voltageBetween any terminal and earth ground

 

Mechanical and General Specifications
Size30.5 mm x 51 mm x 203 mm
Weight300g
WarrantyTwo-years
Battery Life200 hour zinc chloride, 400 hour alkaline
Battery type2 x AA
Low battery indicatorYes
Current sensor opening12.9 mm
Calibration cycle1 year
Test leads
Type:Heavy duty, flexible leads rated for 1000V use.
Field replaceable leads terminate in male shrouded banana plugs
Probes:One red, one black.
Detachable Slim-Reach™ probe tips
Styles:TP1 Slim Reach™ Test Probes

 What's included :

  • Fluke T5-600 Voltage, Continuity and Current Tester
  • 4mm Detachable Probes
  • Instruction Sheet

Also included is a FREE voucher that entitles you to £10 off your next calibration (T&C's apply)