Licence plate holder WHEEL FLUSH YAMAHA XJR-1300 RACER / 2014-2019
The product is developed to keep the functions necessary for your vehicle, as a mudguard and the possibility of fitting the indicators and LED license plate lighting to European standards (lighting supplied in the kit). The ultra-reinforced fixing is made of 5.mm thick steel to stiffen the entire Licence plate holder against vibrations. It is placed on the axle of the swingarm wheel and takes the place of your aluminum chain tensioning shim if necessary. The arm part is made of 5 millimeter thick aluminum. The functionality of the mudguard is made of 3 millimeter thick aluminum. It is curved to fit your tire and prevents splashing the passenger and driver. The entire product is coated with matte black epoxy paint, resistant to bad weather and stone impacts. The mudguard Licence plate holder allows you to fit all European and International number plates as well as stalk indicators and an approved LED number plate light or tail light. The shutter delivered in the kit is positioned in place of the original Licence plate holder , to prevent any infiltration of particles. A 1 meter electrical harness as well as its heat-shrinkable terminals are provided to connect your indicators as well as the license plate lighting, you use your original connectors to make the connections, this will allow it to be connected unplug. For your original indicators, you have the option of mounting them by drilling a second hole. The mudguard Licence plate holder adds a futuristic touch. (Turn signals are not delivered)
LICK WHEEL PLATE HOLDER FOR YAMAHA XJR-1300 RACER / 2014-2019
The product has been developed to keep the functions necessary for your vehicle, as a mudguard and the possibility of putting the indicators and an LED license plate lighting to European standards (lighting supplied in the kit). The ultra-reinforced fixing is made of 5mm thick steel to stiffen the entire plate support against vibrations. It is placed on the axle of the swing arm wheel and takes the place of your aluminum chain tensioning shim if necessary. The arm part is made of 5 mm thick aluminum. The functionality of the mudguard is made of 3mm thick aluminum. It is curved to conform to your tire and avoids splashing the passenger and the driver. The whole product is coated with a matte black epoxy paint, resistant to bad weather and stone impacts. The FENDER plate holder allows to put all European and International license plates as well as rod indicators and an approved LED license plate light or a rear light. The shutter delivered in the kit is positioned in place of the original plate support, to prevent any infiltration of particles. A 1 meter electrical harness and its heat-retractable lugs are provided to connect your turn signals as well as the license plate lighting, you use your original connectors to make the connections, this will allow it to be connected. unplug. For your original indicators, you can mount them by drilling a second hole. The FENDER plate holder brings a futuristic touch. (The indicators are not delivered)
Marque de la moto | Yamaha |
Garantie fabricant | 1 an |
Type de moto | Routière |
Emplacement sur la moto | Arrière |
Autre numéro de pièce | 3760287750285 |
Pays de fabrication | France |
Couleur | Noir |
EAN | 3760287750285 |
Modèle | XJR-1300 RACER |
Pièces classiques | Oui |
Offre groupée personnalisée | Non |
Modèle compatible | Pour XJR-1300 RACER |
Marque | ACCESS DESIGN |
Unité de mesure | Unité |
Numéro de pièce fabricant | SPLRY011 |
Objet modifié | Non |
Utilisation prévue | Pièce de performance |
Quantité unitaire | 1 |
Fabricant compatible | Yamaha |
Produit étranger | Non |