•  
  •  
  • Product details:
  •  
  • Solution for "bulb out signal" / "OBC error message" after installing SMD LED light bulb
  • Solution for fast turn signal blinking response after installing SMD LED light bulb
  • Installation is easy. Just connect the wires with the Splice taps provided and no wire cuting is necessary
  •  
  • Connection Instructions (See the following picture):
  •  
  • Connect one wire to ground and the other wire to the turn/brake wire. You can use the T taps so you do not have to cut your car's wiring. One Load Resistor is required for each turn signal bulb. For more detail, please check Install LED Load Resistors.
  •  

    • 2x LED Load Resistors Canceller Decoder 50W 6 OHM Canbus H1 H3 H7 H8 H11 H15 HB4

     

     

    Product details:

     

    Solution for "bulb out signal" / "OBC error message" after installing SMD LED light bulb

    Solution for fast turn signal blinking response after installing SMD LED light bulb

    Installation is easy. Just connect the wires with the Splice taps provided and no wire cuting is necessary

     

    Connection Instructions (See the following picture):

     

    Connect one wire to ground and the other wire to the turn/brake wire. You can use the T taps so you do not have to cut your car's wiring. One Load Resistor is required for each turn signal bulb. For more detail, please check Install LED Load Resistors.

     

    Features:

     

    Fix blinker flash error, hyper or error flashing of LED turn signal, parking / driving running light or license plate light

    It works as warning canceller, decoder, capacitor, or blinker rapid Flash Equalizer for LED light bulb such as H1, H3, H4, H7, H8, H11, H15, HB4, 1156, 1157, 3156, 3157, 7440, 7443 or etc.

    Size: ~50mm (~1.97 inches) total length from end to end

    DC 12V only

     

    Package included:

     

    2 X 50W 6OHM LOAD RESISTORS

     


    Item Specifics
    To Fit Sidelight
    Technology LED
    Bulb Type Bayonet
    Manufacturer Part Number Does Not Apply
    Brand ANGRONG
    EAN 0702646215342
    Voltage 12 V
    Wattage 50W
    Warranty Period 6 months

    Payment
    • We accept Paypal ONLY.

     

    • Item will be shipped to Paypal shipping address only except special notes from buyers.

    • Payment is expected within 7 days of the auction closing. Unpaid Item dispute will be filed to eBay for non-paying buyers and this will cause buyer's eBay account suspended. Therefore, please be sure that buyer will be able to clear payment through PayPal before bidding or buying.

    Shipping
    •   Most items will ship within 1-2 business days on payment received.

    • Now we only ship to Europe.

    • We do not offer Combine Shipping Service. You Need full amount of Each shipping fee and insurance.

    • All items is shipped from our UK stock via Royal Mail Service. To UK, it will take 2-3 working days. To EU other countries, it will take 8-10 working days. Please make sure your address in eBay is correct. If you want to change the address please E-mail us right after you pay for the item.

    • Shipping fee include packing, warehouse, distribution, order handling and processing costs. We don't offer the pick-up.

    Returns
    • All items should be returned with the original package and it would be not open. And the buyer take the cost of the returned item.
    •  
    • Pls contact us before returning the goods. We will give you the RMA number. If you don't write this number into the parcel, we will not
    •  
    • accept the returned.
    Customer Services
    • Pls contact us from 9:00am to 6:00pm (GMT+8:00) office time, Mon to Sat.
    •  
    • If you have any question about the items or our company, pls send the message via Ebay. We will respond it within 24 working hours.
    •  
    • Pls do not give the negative or netural feedback before contacting us. We are sure we will offer you satisfied reply.

    2x LED Load Resistors Canceller Decoder 50W 6 OHM Canbus H1 H3 H7 H8 H11 H15 HB4

     

     

    Product details:

     

    Solution for "bulb out signal" / "OBC error message" after installing SMD LED light bulb

    Solution for fast turn signal blinking response after installing SMD LED light bulb

    Installation is easy. Just connect the wires with the Splice taps provided and no wire cuting is necessary

     

    Connection Instructions (See the following picture):

     

    Connect one wire to ground and the other wire to the turn/brake wire. You can use the T taps so you do not have to cut your car's wiring. One Load Resistor is required for each turn signal bulb. For more detail, please check Install LED Load Resistors.

     

    Features:

     

    Fix blinker flash error, hyper or error flashing of LED turn signal, parking / driving running light or license plate light

    It works as warning canceller, decoder, capacitor, or blinker rapid Flash Equalizer for LED light bulb such as H1, H3, H4, H7, H8, H11, H15, HB4, 1156, 1157, 3156, 3157, 7440, 7443 or etc.

    Size: ~50mm (~1.97 inches) total length from end to end

    DC 12V only

     

    Package included:

     

    2 X 50W 6OHM LOAD RESISTORS

     



    • We accept Paypal ONLY.

     

    • Item will be shipped to Paypal shipping address only except special notes from buyers.

    • Payment is expected within 7 days of the auction closing. Unpaid Item dispute will be filed to eBay for non-paying buyers and this will cause buyer's eBay account suspended. Therefore, please be sure that buyer will be able to clear payment through PayPal before bidding or buying.

    •   Most items will ship within 1-2 business days on payment received.

    • Now we only ship to Europe.

    • We do not offer Combine Shipping Service. You Need full amount of Each shipping fee and insurance.

    • All items is shipped from our UK stock via Royal Mail Service. To UK, it will take 2-3 working days. To EU other countries, it will take 8-10 working days. Please make sure your address in eBay is correct. If you want to change the address please E-mail us right after you pay for the item.

    • Shipping fee include packing, warehouse, distribution, order handling and processing costs. We don't offer the pick-up.

    • All items should be returned with the original package and it would be not open. And the buyer take the cost of the returned item.
    •  
    • Pls contact us before returning the goods. We will give you the RMA number. If you don't write this number into the parcel, we will not
    •  
    • accept the returned.
    • Pls contact us from 9:00am to 6:00pm (GMT+8:00) office time, Mon to Sat.
    •  
    • If you have any question about the items or our company, pls send the message via Ebay. We will respond it within 24 working hours.
    •  
    • Pls do not give the negative or netural feedback before contacting us. We are sure we will offer you satisfied reply.

    Copyright of Autoaccpart. All rights reserved.

    DataCaciques