Micro BNC 75 ohm straight crimp plug. This true 75 ohm plug is designed for Full HD 1080p applications and general use up to 12GHz. With 15Uin gold plated centre contact and annealed crimp zones these connectors offer a long term durable solution. Suitable for all cables in group FA. When COAX Connectors developed their range of Micro BNC connectors, they were specifically designed to be interchangeable with HD BNCs from Amphenol. If equipment is built using HD BNCs, it is entirely safe to connect with Micro BNCs and vice versa.
United States Patent No. 9,071.013 applies.
Our Micro BNC 75 ohm connectors are designed for HD & UHD Broadcast, Telecom, HDcctv, Instrumentation and similar applications that require high performance in an high density package. The unique patented coupling nut allows the use of a special tool to disconnect the connectors when they are closely mounted. Tested to beyond 12GHz and exceeding the requirements of SMPTE ST 2082-1, these connectors are used in Full HD1080p (3G), HD-SDI and are fit for Ultra HD 4K (12G) applications. With a diameter of only 7.8 mm, mounting density is increased by 4 times when compared with a standard BNC.
| Electrical Specification | |
|---|---|
| Impedance | 75 Ohm |
| Frequency Range | Up to 12GHz |
| Dielectric Withstand Voltage | 1000 Veff |
| Insulation Resistance | 10000 M-Ohm |
| Return Loss | -26 dB @ 6GHz |
| Mechanical Specification | |
| RoHS Compliant | Yes |
| Centre Contact Termination | Crimp |
| Outer Contact Termination | Crimp |
| Mating Cycles | 500 |
| Contact Retention | 10N min |
| Cable Retention | 100N min |
| Weight | 5.64g |
| Mating Force | 10N Max |
| Un-Coupling Force | 10N Max |
| Environmental Specification | |
| Operating Temperature | -55 to +155 Deg C |
| IP Rating ( Mated ) | IP64 |
| Materials | |
| Centre Contact | Beryllium Copper |
| Outer Contact | Brass |
| Insulator | PTFE |
| Bayonet Cap | Brass |
| Gasket | Silicone |
| Centre Contact Plating | Gold |
| Outer Contact Plating | Nickel |
| Image 360 Cable Technical Specification | |
| Conductor | 0.605mm bare copper wire |
| Dielectric | Gas-injected foam high density polyethylene |
| Inner screen | Aluminium/polyester tape |
| Outer screen | TCW 90% coverage |
| Impedance | 75 Ohm |
| Capacitance nominal | 54.0 pF per metre |
| Dielectric constant: | 1.45 nom |
| Velocity of propagation: | 81 - 84% |
| Resistance: | |
| Inner conductor | 61.0 Ohms/Km |
| Outer conductor (screen) | 17.0 Ohms/Km |
| Jacket material | ‘LOW SMOKE’ halogen free copolymer |
| Overall diameter | 4.50mm |
| Max reel length | 500 metres |
| Weight | 3.0Kg per 100m |
| Attenuation @ | 1.0 MHz | 1.10 dB/100m |
| 71.5 MHz | 9.10 dB/100m | |
| 88.5 MHz | 9.90 dB/100m | |
| 135.0 MHz | 12.20 dB/100m | |
| 180.0 MHz | 13.90 dB/100m | |
| 270.0 MHz | 16.90 dB/100m | |
| 750.0 MHz | 29.40 dB/100m | |
| 1500.0 MHz | 42.20 dB/100m | |
| 2250.0 MHz | 52.10 dB/100m | |
| 3000.0 MHz | 60.30 dB/100m |
If you require a custom length please buy the next length up and post a note to me with the purchase.
EG: If you require a 25cm cable please buy the 50cm cable and notify me of a custom cable length in the purchase message box where you complete your purchase, or message me in the normal way if you wish.
Note: I measure cable length from the back of the crimp ferrules at each end(please see picture).
This cable, Argosy Image 360, has a minimum bend radius of 51mm, thus using circa 160mm to make a 'U' bend.