Ecosse Reference ES4.45 Biwire Loudspeaker Cable - Factory Terminated
Ecosse stands apart in regards to the appropriate conductors one should use in a biwire combination. (ES2.23+ MULTISTRAND + CS2.15 SOLIDCORE)
Our extensive R & D confirms that a mix of multi-stranded and solidcore conductors offer greater dynamics, more extended bandwidth at frequency extremes, and the finest of detail. Our competitors fail to understand the obvious advantages of using both multi-stranded AND solid core conductors in a bi-wire configuration (they tend to use 2 x the same multi-stranded cable resulting in a rather sluggish sound).
For systems offering greater clarity and dynamics, we offer the superb mid/hi-end biwire set-up ES4.45, which employs separate multi-strand and solidcore conductors- in separate sheaths. With the ES2.23+/CS2.15 (or ES4.45 bi-wire), our ES2.23+ multistrand cable drives the bass/mids and is the perfect match with the CS2.15 solidcore, driving the tweeters. Here we introduce a large perfectly round solidcore conductor-our, so-called, CS2.15 'speaker cable'.
The CS2.15 is a quality; full bandwidth loudSpeaker cable sometimes necessary when we acknowledge that some amplifier/loudspeaker combinations, while exhibiting many strengths, may suffer well documented slight upper-mid glare and treble edginess (and/or over-emphasised bass). The greater strengths of its 1.5 sq mm perfectly circular solidcore conductors provide the solution to this problem.
The occupation area for the mid and high frequency signals in a solidcore conductor is greater than a stranded conductor of similar X-section, therefore resistance is reduced and delivery of high frequency information is improved and even extended. Low DC resistance meanwhile maintains low frequency extension and control, presenting it with weight, speed and perfect pitch accuracy. The result is an improved sense of ambience and larger soundstage; vocals are clearer with real presence and natural breath tones; glare and edginess give way to a sweeter and more detailed treble.
A loudspeaker consists of two drive units. - a high-frequency (HF) unit (tweeter), and a low frequency (LF) unit (woofer) they employ a "cross-over network" to direct low signal frequencies to the woofer, and high frequencies to the tweeter. This set up enables the loudspeaker to be bi-wired.
In a biwire configuration 2 pairs of speaker cables are employed in order to ensure that the signals for the tweeter and woofer are sent by separate routes. Here, the cables feeding the higher frequencies (H.F.) are not affected by electromagnetic interference from the low frequency signals (L.F.), which are carried in separate conductors.
Technical Specifications
CS2.15
Perfectly circular Ultra Hi-Purity-OFC solidcore conductors
Superior low-loss PP dielectric insulation
1.76mm sq conductor x-section for treble extension
Cotton fibre and paper tape acoustic damping
7.5mm o/d circular soft PVC jacket
ES2.23+
Ultra Hi-Purity-OFC multistranded conductors
Superior low-loss PP dielectric insulation
Rope-lay twisted pair configuration
3.00mm sq. conductor x-section for bass/lower mid extension
Cotton paper and yarn filled
9.5mm circular o/d soft PVC jacket
Suppliers Of High Precision Turntable and Hi-Fi Related Essentials
Ecosse Reference ES4.45 Bi-wire Speaker Cable
Termination options: 4 mm Banana plugs, OFC or Monocrystal Spades or Camcon / BFA Plugs. Terminations can also be mixed. All terminations are carried out by Ecosse.
Free cable burn in service with this cable using the Nordost Vidar machine. Please contact us or see below for details
For systems offering greater clarity and dynamics, we offer the superb mid/hi-end biwire set-up ES4.45, which employs separate multi-strand and solidcore conductors- in separate sheaths. With the ES2.3/CS2.15 (or ES4.45 bi-wire), our ES2.3 multistrand cable drives the bass/mids and is the perfect match with the CS2.15 solidcore, driving the tweeters
Here we introduce a large perfectly round solidcore conductor-our, so-called, CS2.15 'speaker cable'.
The CS2.15 is a quality; full bandwidth loudSpeaker cable sometimes necessary when we acknowledge that some amplifier/loudspeaker combinations, while exhibiting many strengths, may suffer well documented slight upper-mid glare and treble edginess (and/or over-emphasised bass). The greater strengths of its 1.5 sq mm perfectly circular solidcore conductors provide the solution to this problem.
The occupation area for the mid and high frequency signals in a solidcore conductor is greater than a stranded conductor of similar X-section, therefore resistance is reduced and delivery of high frequency information is improved and even extended. Low DC resistance meanwhile maintains low frequency extension and control, presenting it with weight, speed and perfect pitch accuracy. The result is an improved sense of ambience and larger soundstage; vocals are clearer with real presence and natural breath tones; glare and edginess give way to a sweeter and more detailed treble.
This combination has won numerous 5-STAR/BEST of TEST/ULTIMATE GUIDE AWARDS
Can be configured 2-to-4 or 4-to-4.
The ES4.45 is available ex factory pre-terminated and in nylon webbing- to keep the cables tidy. It represents our no-compromise, quality performance biwire cable set.
In a tri-wire or tri-amp set-up, we recommend the ES2.3 driving the bass units and 2 runs of CS2.15, one driving the mid units and one driving the treble units for ultimate bandwidth extension and presence.
https://www.ecossecables.co.uk/Tables/table_frameset6.html
WHAT HI-FI? SOUND AND VISION - ULTIMATE GUIDE 2002
WHAT HI-FI? SOUND AND VISION - ULTIMATE GUIDE 2003
"Ecosse's ES2.3/Cs2.15 is superb."
"…you can't do better than the fabulous ES2.3/CS2.15 biwire."
WHAT HI-FI? SOUND AND VISION 2001
Who would want you to enjoy to the fullest your new interconnects right of the moment you plug them in? No more waiting for endless burn-in! Just plug them in and enjoy!
As of now Analogue Seduction offers to all its customers who purchase an interconnect the possibility of a professional burn-in before
Feedback/item | From Buyer | Date/time | |
Exactly as described, great comms and quick delivery. Hifi Tuning Supreme 3 Copper Slow 5 x 20mm Audio Grade Fuses T630mA | getgaffer (1017) | ||
Nice...Thank you very much A+ Milty Zerostat 3 Anti Static Gun for Vinyl Records LPs DVDs CDs | sheritage1450 (350) | ||
all perfect !!! thanks Analogue Studio Anti-static Record Cleaning Arm. (HI-FI Choice Recommended) | broshka80 (729) | ||
Quick Delivery & Item as described! Klipsch Reference Base R-41PM Powered Monitor Speakers - RRP £399 | anthonydracou (3) | ||
Arrived on time and as described. Thank you ! AudioQuest RJ/E Cinnamon Ethernet Cable 1.5m Length - CUSTOMER RETURN | bigfoghornleghorn (1050) |
Payment
All items must be paid for within 7 days of the transaction date by one of the following payment methods:
Credit Card (All types accepted)
Paypal
Cheque
Postal Order
Bacs Transfer
If you are unable to make payment within the specified time period please let us know as soon as possible.
Returns
We want you to feel happy with your purchase, so if for any reason you are not, you may send your item(s) back to us within 14 days for a full refund or exchange-free of charge.
Please note, postage costs are non refundable except in the following circumstances:
* the item you receive is different to that ordered.
* OR the item you receive is damaged or faulty.
In the above cases a full refund/exchange will be issued including any additional postage costs incurred by the buyer.*
*Please note, we can only refund up to the minimum postage amount required to send your item(s) back to us. Therefore, we always recommend that items be returned to us using royal mails 2nd class service with recorded delivery for insurance purposes.
All items must be returned to us in their original condition within 14 days of receipt. Please let us know before hand why you are planning on sending an item back to us and remember to include this information in your return. It is also vital that you include your user id & item number so we can deal with your request for a refund or exchange as quickly as possible
All refunds will be issued via your original method of payment and normally take up to 3 working days to process.