GOLDRING EROICA H TESTINA BOBINA MOBILE PER GIRADISCHI NUOVA
Prezzo 530,00euro
The Eroica H is a true audiophile moving-coil
cartridge designed to be used with any type of phono input. It features
the famous Gyger II diamond stylus profile, a nude, fine-line elliptical
type with a 6 µm lesser radius, which gives smooth, extended highs, low
distortion and reproduces a highly detailed and dynamic sound. To take
proper advantage of this, the pick-up coils are hand-wound on a pure
iron armature and suspended in a magnetic circuit of advanced design,
featuring low mass and powerful rare earth magnets. The high output
Eroica H offers an exceptional standard of performance and reliability
and can be used with any amplifier which features either a standard 47 kΩ MM phono input or a dedicated low impedance MC input.
The Eroica uses a neodymium (NdFeB), rare-earth,
permanent magnet; the strongest type commercially available. This gives
us the opportunity to shorten the magnetic circuit in the cartridge and
still achieve the required field strength in the pole shoe gap. In this
way the overall mass of the cartridge has been reduced to help improve
trackability and make it compatible with a wider range of tonearms.
The Eroica uses a strong one piece body which holds
the fixed parts securely in place. Made from a special type of
ultra-rigid, glass reinforced polyester called Pocan®, the body can be
tightly bolted to the head shell for maximum efficiency and optimum
sound quality. Because Pocan® has a high strength-to-mass ratio, the
overall mass of the Elite is kept below 6.0 g.
Each Eroica cartridge is hand-built and then
individually adjusted for azimuth and compliance by our experts. The
correct setting of stylus azimuth (or horizontal tracking angle) is
essential for the maintenance of a proper stereo sound stage. Badly
adjusted azimuth can cause uneven channel balance and increased
crosstalk between channels which would severely degrade the stereo
image. Correct compliance ensures that the cartridge has an even
frequency response within the specified limits and will be compatible
with all low to medium-mass tonearms.
Frequency Response
20 Hz - 22 kHz ± 3 dB
Channel Balance
within 1 dB @ 1 kHz
Channel Separation
better than 25 dB @ 1 kHz
Sensitivity
2.5 mV ± 1 dB, 1 kHz @ 5 cm/sec
Dynamic Compliance @ 10 Hz
18 mm/N
Equivalent tip mass
0.6 mg
Vertical Tracking Angle
24 °
Stylus Type
Non-Replaceable
Load Capacitance
100 - 500 pF
Internal Inductance
0.2 mH
Cartridge Mass (inc. fixings)
6.6 g
Fixing Centre
0.5 " (12.7 mm)
Playing Weight
1.5 - 2.0 g (1.7 g nom.)