NEW HIGH POWERFUL 12V 80W DC Brushless Water Pump DC80D-1265S 6.5m Lift 5300 LPH Strong Pump

This is among Our company's MOST POWERFUL MICRO BRUSHLESS Pump series; 

From aspect of power consumption, it's significantly more powerful: ~80W @12VDC 

(As a comparison, DC50 involved series with power of ~50W @12VDC, );

Wide Working Voltage Range: 5~ 14VDC;

Max. Static Lift: ~ 6.5m @12VDC;

Max. Horizontal Flow Rate: 5300L/H;

Both inlet and outlet are with external diameter of 38mm.

Main Features

Brushless DC motor, also known as EC motor; Magnetic Driven (NO DIRECT AC 100-240V POWER CONNECTION, PROHIBITED);

Small size but strong; Low consumption & High Efficiency;

Long time continuous working with low noise;

Safety - no spark, Explosion - proof; Low noise about 40dB;

Submersible, 100% waterproof; Max Working Temperature: 110 degree (Recommended to be out of water at high temperature);

Wide range of working voltage; Maintenance - free;

Can be used to pump water, oil, weak acid and alkali solution (special liquids are needed to be pre-tested in advance);

Variety Power: DC electric source, Battery or Solar Panel, etc;

Soft Start with Low in-rush current;

Eco-friendly material design

OEM and ODM are accepted based on MOQ and exact inquiry of customers.

 

Specifications

 

Model: DC80D-1265S, 12VDC  IT'S COMPLETELY NEWLY-DESIGNED THE MOST POWERFUL BRUSHLESS DC WATER PUMP OF OUR COMPANY.
Size: 144mmx213.8mmx147.3mm	Weight: ~2.1 Kg	Material: Engineering Plastics
Inlet: 38mm	Outlet: 38mm	Heat Resistance: -10 ~110°C
Rated Voltage: DC 12V	Rated Current: 6.6A	Power Consumption: ~80W @12VDC
Static Head: 6.5 meters @12VDC	Flow Rate: 5300L/H @12VDC
Plug: 5.5×2.1 DC Plug	Cable Length: 1.5 meters	Working: Support Continuous Work
Noise: about 40dB	Water Proof: 100%	Submersible: Yes
Driven: Brushless Magnetic	Self-priming: No	Speed Adjustable: NOT SUPPORTED BY THIS MODEL

Package includes:

1 x All-new Original DC80D-1265S, currently the most Powerful 12VDC Micro DC Brushless Pump 

(No power supply is included)

Some functions can be achieved through customization, based on MOQ and exact inquiry of customers.

Cautions - some notes you must pay attention before your purchase!

1, As micro brushless dc pump, it works via electronic commutation while not brush friction, so there exists no loss caused by brush friction. 

Pump works with relatively high efficiency. stator part is completely potted inside pump body with epoxy material and control circuit part is potted inside too, 

completely physically separated from external fluid environment and completely waterproof.

2, Pump supports relatively continuous long time work with relatively low noise at normal working environment.land use or submersible installation can be both OK, 

but it cannot be self-priming, just make sure that fluid can actively flow passing through inlet/outlet 

because pump works via centrifugal force of high-speed rotation of impeller inside (push/throw fluid out). 

No long-time dry work without fluid, or it may damage the pump.

3, Pump adopts soft-start mechanism and its start-up current increases gradually (step by step), so there exist no over-high start up current and is suitable for many stable power supply. 

Note that the max voltage of power supply is advised to be below 14VDC (For model with 12VDC as rated voltage) when in application.

4, Pump can be suitable for high temperature fluid circulation application: 

note that when temperature is over 60C, pump is fully supported to be located under water;

when temperature is higher, pump is recommended to be placed at land while not under water. But No Dry run.

5, about power polarity: For DC head connector, Inner is Positive, Outer is Negative. 

Matching DC power supply. DIRECT AC POWER CONNECTION is PROHIBITED!

6, to avoid possible misunderstanding of relevant parameters, here we also say something about flow rate value & max static lift value of pump products: 

For static lift value, it means the max vertical height of flow column when outlet is connected with external matching hose/tube, when pump works at rated voltage.

For max flow rate value, it means the max flow rate of pump at horizontal level, when pump works at rated voltage. 

The higher the height, the lower the flow; when height reaches lift value, flow rate becomes zero.

Note that lift value and spraying/shooting height of pump are completely different. So dear users, please do not be confused by them.

Meanwhile, certain deviation of around +-13% is advised to be left when in relevant applications, to leave enough margin.

Our pump products can be  widely used in various kinds of fields, such as computer cooling system, solar fountain, arts and crafts,  parts of water heater, plumbing mattresses, micro solar fountain, bidets, swimming pool, foot massage basin, body massage bathtub, car cooling system, fueller, humidifier, air conditioner, medical device, and many other cooling and circulation system.