Custom multi-pair "snake"/trunk cable suitable for AES3/EBU/DMX512/RS-422/RS-485 digital audio and control data as well as normal or extended bandwidth balanced analog audio signals.  This cable has 10 pairs of 24AWG (10PR 24AWG) PVC-insulated, untinned copper (NOT CCA) wire with an overall high-coverage, shield braid and PVC TPE outer jacket.  There is a cotton string running down the middle for added linear strength, and the conductors are separated from the shield braid by a thin layer of tissue paper.  This cable is extremely flexible, and the braid and TPE outer jacket provide superb mechanical ruggedness.  The matte black jacket should blend in well on most any stage environment.  There are 5 pair colors (orange, green, blue, gray, pink) with each pair marked with either one or two sets of red or black dashes indicating pair polarity and bringing the total unique pair marking up to the 10 pairs present.

This cable has been tested to have a characteristic impedance of about 100-110Ω, low-capacitance (9.3pF/ft intrapair, 12.3pF/ft shorted-pair-to-shorted-pair, and 18.9pF/ft shorted-pair-to-shield at 100kHz), low-inductance (65.5nH/ft looped-pair at 100kHz), and low DC resistance (7.8mΩ/ft) making it suitable for high-speed digital balanced audio signals, as well as balanced digital data and control signals such as RS-485 (used by DMX512, etc.), RS-422, etc.  AWM style is 20276.  This cable is UL recognized and rated 30V at 80°C.

Please note that, unlike some (often significantly more expensive) AES/EBU snake/trunk cables, this does not have the pairs individually shielded, nor is there a foil shield or drain wire.  This makes the cable lighter, thinner, and easier to terminate in high-density multi-conductor connectors as well as less expensive, but performance especially over long distances may not be quite as good due to the reduced shielding.

This is a custom part from Oki Electric Cable (part of their Okiflex line) and is new surplus.  The Oki part number is 4/12/0.08A 10P HRV23-SV(20276)K.  It will be cut from a factory coil to your specified total length.  There are no connectors on the ends.  This cable will be bare, cut cable suitable for terminating in your own breakout boxes, connectors, etc.

You will receive TEN FEET of cable per quantity purchased.  This will be a continuous hank cut to your specified length for lengths under 250ft and may be continuous or multiple cut lengths for lengths over 250ft.  You will not receive a spool or any other documentation unless otherwise agreed.  Please inquire prior to purchase for continuous lengths greater than 250ft; I can likely accommodate your needs.

As this is a custom cut item, there are no returns or refunds unless the item is not as described or defective.  Please ensure that this is what you want before purchasing.  I will be happy to answer any questions you may have.  Simply use the "Ask seller a question" feature or inquire with your Best Offer.

Shipping can be combined on this or my other items.  Use the "request total from seller" feature for combined shipping or put terms in your best offer.

International buyers: Please note that you are responsible for any and all taxes, duties, tariffs, brokerage costs, etc. which may be assessed on this item in addition to any shipping and handling shown, and these costs may arrive COD (cash on delivery) when the item is made available to you.