eBay

PRODUCT INFORMATION
E-TECH Engine enamel is a high quality, long lasting, enamel coating specially formulated with a ceramic resin to cope with temperatures of up to 250°C, and is suitable for use on most engine parts and components. Ideal for engine blocks, valve/rocker covers and gearbox/differential casings, plus other engine bay components. The spray-on application is simple to apply, quick drying and provides a hard, chip resistant, long lasting finish which will retain its colour due to the high pigment content. Available in 6 colours: Black, Blue, British Racing Green, Orange, Red and Silver - THIS LISTING IS FOR BLACK Features Long lasting high quality finish Tough chip and crack resistant formula Resists oil, engine additives, road salt & weathering Excellent durability No primer needed - strong adhesion to bare steel and metal* Specification: - Can Size: 400ml - Not suitable for brass and other non-ferrous metals - Long term performance of this paint on aluminium and stainless steel surfaces cannot be guaranteed. - It is a spray on application so quick drying and provides a hard, chip resistant, long lasting finish which retains its colour due to the high pigment content. - Colour: Black
INSTRUCTIONS
PREPERATION - IMPORTANT: READ THIS For best results ensure the engine or part you are painting, and the paint are at room temperature before use (approx 17°C to 21°C) For best results apply in a warm, dry and dust free area Use a steel brush to remove loose dirt and rust deposits from surface to be painted Then clean the area to be painted thoroughly with a degreaser or steam cleaner, removing all traces of silicone, oil, dirt, grease etc. Mask off any area that you do not want to be painted The area to be painted must be completely dry and thoroughly clean before you start. APPLICATION Shake can vigorously for a minimum of 2 minutes before use. Hold can 20-30cm (8-12") from surface and spray using a smooth side to side motion. Build up layers with several thin coats allowing approximately 15-20 minutes between coats for the surface to dry to a tacky film (do not apply heavy coats). Shake can between coats After applying the final coat allow 4 hours for the enamel to dry properly
DELIVERY
For all UK orders we offer Free Standard delivery which on average takes 3 - 5 working days. We also give you the option to upgrade to a Next Working Day delivery service. We are able to ship worldwide using DPD or Parcelforce, the cost is based on the size, weight and destination of your order. (Please email and state your destination for a postage quote)
RETURNS
If an item is damaged on delivery, we must be notified within 3 days off the delivery date, we will then arrange for a replacement or a refund of the item (it needs to be within this time period for us to make claims with our couriers) If you have simply changed your mind or no longer require the item(s), you must notify us within 30 days from receiving your order. The item(s) must be in their original unused and unopened packaging and be in a resalable condition for a full refund. You will need to pay for the cost of returning the item(s) and the item(s) remain your responsibility until we receive them.
PAYMENT INFORMATION
For Paypal payment please use the eBay checkout facility. We accept Credit or Debit card payments - Please call to make payment

PRODUCT INFORMATION

E-TECH Engine enamel is a high quality, long lasting, enamel coating specially formulated with a ceramic resin to cope with temperatures of up to 250°C, and is suitable for use on most engine parts and components.

Ideal for engine blocks, valve/rocker covers and gearbox/differential casings, plus other engine bay components.

The spray-on application is simple to apply, quick drying and provides a hard, chip resistant, long lasting finish which will retain its colour due to the high pigment content.

Available in 6 colours: Black, Blue, British Racing Green, Orange, Red and Silver - THIS LISTING IS FOR BLACK

Features

Long lasting high quality finish
Tough chip and crack resistant formula
Resists oil, engine additives, road salt & weathering
Excellent durability
No primer needed - strong adhesion to bare steel and metal*

Specification:

- Can Size: 400ml
- Not suitable for brass and other non-ferrous metals
- Long term performance of this paint on aluminium and stainless steel surfaces cannot be guaranteed.
- It is a spray on application so quick drying and provides a hard, chip resistant, long lasting finish which retains its colour due to the high pigment content.

- Colour: Black

INSTRUCTIONS

PREPERATION - IMPORTANT: READ THIS

For best results ensure the engine or part you are painting, and the paint are at room temperature before use (approx 17°C to 21°C)
For best results apply in a warm, dry and dust free area
Use a steel brush to remove loose dirt and rust deposits from surface to be painted
Then clean the area to be painted thoroughly with a degreaser or steam cleaner, removing all traces of silicone, oil, dirt, grease etc.
Mask off any area that you do not want to be painted
The area to be painted must be completely dry and thoroughly clean before you start.

APPLICATION

Shake can vigorously for a minimum of 2 minutes before use.
Hold can 20-30cm (8-12") from surface and spray using a smooth side to side motion.
Build up layers with several thin coats allowing approximately 15-20 minutes between coats for the surface to dry to a tacky film (do not apply heavy coats).
Shake can between coats
After applying the final coat allow 4 hours for the enamel to dry properly

DELIVERY

For all UK orders we offer Free Standard delivery which on average takes 3 - 5 working days.
We also give you the option to upgrade to a Next Working Day delivery service.

We are able to ship worldwide using DPD or Parcelforce, the cost is based on the size, weight and destination of your order. (Please email and state your destination for a postage quote)

RETURNS

If an item is damaged on delivery, we must be notified within 3 days off the delivery date, we will then arrange for a replacement or a refund of the item (it needs to be within this time period for us to make claims with our couriers)

If you have simply changed your mind or no longer require the item(s), you must notify us within 30 days from receiving your order. The item(s) must be in their original unused and unopened packaging and be in a resalable condition for a full refund. You will need to pay for the cost of returning the item(s) and the item(s) remain your responsibility until we receive them.

PAYMENT INFORMATION

For Paypal payment please use the eBay checkout facility.
We accept Credit or Debit card payments - Please call to make payment