Remote ON/OFF–Turn electrical devices on/off from anywhere(Just need wifi)

 

This product is a wireless switch supports inching /self-locking mode. Users can add the device to the APP eWeLink in order to remotely control connected home appliances or devices. In self-locking mode, customers can remotely turn on/off connected devices immediately. When in inching mode, customers can have two wiring ways to select:

Turn on 1s and then auto-off
Turn off 1s and then auto-on.

The product enables remote control of home appliances through the mobile application eWeLink, available on both Android and iOS.

The self-lock/inching mode wireless switch has two input voltage supply specifications: 5V and 5V/12V. No matter which specification is selected, the features are the same.

 

Remote ON/OFF :  Turn electrical devices on/off from anywhere(Just need wifi)
Power Supply :   5V-32V DC input
App Support :   Free iOS and Android mobile App eWeLink
Sync Status :   Real time device status provided to App
Timing :   Set scheduled/countdown timers to turn on/off at specified time
Share Control:   Control your smart home together with your family
Scene:   Turn on/off a gang of devices with one tap
Smart Scene:   Trigger on/off by temperature, humidity or other environmental conditions
Voice Control:   Works perfectly with Amazon Alexa, Google Home

 

 

LED Indicator:

There are 3 LEDs, the LED beside self-lock/inching mode button indicates the working mode (on: self-locking mode, off: inching mode).

The LED beside on/off setting button indicates WIFI status(enter pairing status: long press the setting button until LED blinks fast).

And the one below the relay indicates relay on or off status (on: turn on connected device, off: turn off connected device).

 

 

 

 

Add device to eWeLink:

1. Power up the device with 5V DC or 12V DC.

2. Press the above button for 7 seconds until the red LED fast blinks.

 

Maybe the device is “Offline” on eWeLink, for the device needs 1 minute to connect with your router and server. When the green LED on, the device is “Online”, if eWeLink shows still “Offline”, please close eWeLink and re-open.

 

Security mechanism
One device one owner. Other people can not add the devices that have already been added. If you want to add your device to another account, don’t forget to delete it first. 

 

 

Specification
Dimensions:70.5mm*27.4mm*23mm / 2.78*1.08*0.91''
Power supply: 5V DC or 5V/12V DC
LEDs: 3 LEDs which indicate working mode, wifi status, relay on/off status respectively.
Two input interfaces
Board consumption: <1W
Standby current: 80mA
Max input current: 10A
Supports to control different voltage ranges
Relay lifespan: more than one million times
100M electrical insulation resistance
Electric shock voltage: 1000V
Relay maximum pull time: 15ms
Relay maximum release time: 5ms
Operating temperature: 0ºC-40ºC(32°F-104°F)
Operating Humidity 40% ~ 80% RH

Application

The switch can be applied to access control, turn on PC, garage door, etc. 

 

 

Bluetooth Wi-Fi 4 Channel Switch

 

 

If below answers can’t solve your problem, please submit a feedback on eWeLink.

1. My device has added successfully but stays “Offline”.

Answers: The newly added device need 1-2 min to connect to your router and the Internet. If it stays offline for a long time, please judge the problem by the green led status:

1.1. Green led quickly blinks one time and repeats, which means device failed to connect to the router. The reason may be you have entered wrong WiFi password or your device is too far away from the router, which causes a weak WiFi signal. The device can not be added to the 5G-wifi-router, only the 2.4G-wifi is OK. At last, make sure that your router is MAC-open.

1.2. Green led slowly blinks one time and repeats, which mean the device has connected to router and server but failed to be added to device list. Then power on the device again, if it still not working, just add the device again.

1.3. Green led quickly blinks twice and repeats, this means the device has connected to the router but failed to connect to the server. Then please confirm your WiFi router works normally.

2. Why the APP can’t find the device in paring status?

Answers: That’s because of your phone’s cache. Please close the WLAN of your phone then open it after a minute. At the same time, please power off the device if you can, then power up to try again.

3. The green led keeps off, even if the device is powered on. Press the button but the device does not work.

Answers: The circuit may be broken, Pls contact us at the first time.