Conceal Textured Caulk for Wood
10 pack of 29oz cartridges
Visit our store for more products
timelesswoodcare.com
Conceal textured caulk delivers performance that’s hard to see. Conceal’s 7 colors blend in with the most popular stains used on log and wood homes, and Conceal’s light texture simulates the natural roughness of wood. The combination of color and texture makes it hard to see where the caulking ends and the wood begins. Instead, they just blend together. Although the caulking is hard to see, Conceal delivers performance. It outperforms all other textured caulks currently available.
Conceal
• Cleans up with soap and water
• Is resistant to rainfall in 1-4 hours
• Has a limited lifetime warranty
• Has superior elongation, memory and adhesion
Tooling
Conceal should be tooled directly after application
to ensure good adhesion and a smooth looking bead.
Conceal may be tooled with ordinary masonry-type
tooling blades, a wetted finger, or a damp polyethylene
foam brush.Work the material smooth, tooling
Conceal tightly to the surfaces, keeping a rag
handy for clean up.
Checks and Cracks
Logs tend to take on water from rain and snow
through cracks and checks; therefore, it is important to
pay close attention to these openings and prep and seal
them properly. Note: Most small checks should not be
caulked. Only the larger ones (1/4” or larger) should
be sealed with backer rod and caulk.
Joint width should be a minimum of 1/4”, but no
larger than 2”, and 4 times the anticipated joint movement.
For example, if you anticipate movement
of 1/8”, bead width should be about 1/2”.
For joints 1”
wide or more,
the depth
should be 3/8”
to 1/2”.
The
depth of joints
less than 1”
wide should be
half the width but no less than 1/4”.
(Joint depth, over
-
all, should be between 1/4” and 1/2”.)