Item Details

Shoe GOO is the #1 shoe repair adhesive! It’s ideal for fixing worn soles or damaged heels, coating shoes to prevent premature wear and sealing galoshes, waders or rubber boots. The unique formula is designed for strong abrasion resistance and better adhesion to flexible materials. 
Creates extra traction – can even be used on skateboards! 

Rebuild, Protect, Repair. Shoe Goo is a superior adhesive and sealant that repairs all types of footwear easily and permanently. It's perfect for use on various materials such as leather, rubber, vinyl and canvas. Use Shoe Goo to mend rubber soles, tears in canvas or leather tops or to stop shoe laces from fraying. It dries to a waterproof, flexible rubber, so it will repair waders and boots without breaking or cracking.
The original Shoe Goo offers a permanent, fast repair and is clear/transparent. This is a 1.0 Fl oz tube and is Made in USA.

Follow these step-by-step directions when using Shoe GOO: 

DIRECTIONS - Read directions and test small area before use.

1. Surface should be clean, dry and free of dirt.
2. Puncture seal in neck of tube using pointer cap. Ideal application temperature range is 50 to 90 ºF (10 to 32 ºC). However, fully cured adhesive can withstand temperatures from -40 to 180 ºF     (-40 to 82 ºC) intermittently.
3. Apply directly to surfaces to be protected, bonded or repaired. For  waterproofing and protecting, use thin coats (spread with a  disposable tool) to build a thick coating, allowing each layer to set 3-4 hours.
4. Allow repair to cure for 24 hours. Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours.
5. For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
6. Clean uncured adhesive with acetone or citrus-based solvents.  Cured material may be removed by cutting or scraping.