Motion detector with a photo camera to verify alarms

• Transmits a photograph in under 9 sec
• Sees in the dark
• Operates on a distance of up to 1700 m from the hub
• Photo capture only when alarmed
• All pictures are encrypted
• Ignores pets weighing up to 20 kg and growing up to 50 cm
• MotionCam detectors require Hub 2 or Hub 2 Plus for operation
• Operates up to 4 years on the pre-installed batteries

Reveals what’s happening

With the MotionCam, you see what triggered an alarm. The detector spots people’s motion within a 12-meter range and takes a series of photos.
In contrast with the video surveillance systems, MotionCam wireless detectors take minutes to install, are independent of Wi-Fi, and continue to operate smoothly even during a blackout.

Classification	Electro-optical combined radio channel security detector with a photo camera
Detector type	Wireless
Installation	Indoors
Motion detection distance	Up to 12 m
Pet immunity	Weight: up to 20 kg Height: up to 50 cm
Compatibility	Only with Hub 2 or Hub 2 Plus
Sensing element	PIR sensor
Detection angles	Horizontal — 88.5° Vertical — 80°
Camera view angle	90°
Alarm signal delivery time	0.15 sec
Photo verification	Time to deliver a photograph with default settings: up to 9 sec Photo quality: up to 640 × 480 px Pictures in a series: 1-5 pcs
IR backlight for night mode pictures	Available
Sensitivity	Adjustable, 3 levels
Recommended installation height	2.4 m
Power supply	Batteries: CR123A (x2), 3 V
Jeweller radio technology	Communication range with detectors: up to 1,700 m in the line of sight Two-way communication between devices Operating frequencies: 868.0 - 868.6 MHz Self-adjusting RF output power: up to 20 mW Block encryption based on AES algorithm Detector polling period: 12−300 s Frequency hopping
Wings radio technology	Transmission of visual alarm verifications
Temperature sensor	Available
Operating temperature range	From -10°C to +40°C
Operating humidity	Up to 75%
Anti-sabotage	Fraud protection Jamming notification Tamper-resistant
CMS compatibility	Motion alarms are transmitted to CMSs that support SIA and Contact ID protocols Visual alarm verifications are transmitted to the Manitou, ABsistemDC(NG) and SBN CMS and Ajax PRO Desktop app
Remote configuration and testing	+
Protection class	IP50
Dimensions	135 × 70 × 60 mm
Weight	167 g
Complete Set	MotionCam motion detector SmartBracket mounting panel x2 CR123A batteries (pre-installed) Installation kit Quick Start Guide