Part Number # M410F63
Product Description:

New Hejnar Photo conversion set for Manfrotto 410 gear head.  This combination of plate and clamp will let you use Manfrotto geared head with any arca swiss equipment. Manfrotto gear head is more precise than ball head and preferred by many photographers. Many architectural and interior photographers prefer geared 3-axis tripod heads rather than ball heads because they can make precision adjustments to each axis. Two popular heads are  Manfrotto 405 and 410 which each use Manfrotto QR plate. Arca-swiss plate fans can now bypass this. Clamp can be disconnected from plate and use independent on other equipment if needed. Clamps can be positioned in relation to adapter plate in 90-degree increments to make it convenient for everybody. Clamp can be mounted to adapter plate either with two or three screws and will depends on clamp orientation
An adapter plate is attached to Manfrotto geared head in two simple steps.
1) removing lock down level with provided 3mm hex key.
2) Connect plate to geared head using one 1/4-20 screw and one 10-32 screw.


Clamp Compatible with:
  • Markins including level release clamp
  • Really Right Stuff, including level release plate.
  • Arca Swiss
  • Wimberley
  • Kirk
  • Photo Clam
  • Foba 
  • Vanguard ABH Series Ball Heads (ABH is Vangaurds only Arca-Compatible series)
  • Custom Brackets
  • Jobu Designs
  • Acratech
  • Other Arca swiss type products 
Specification:
  • 3.25 inch long
  • Socket is countersunk on top for 1/4-20 screw but also threaded 3⁄8”-16.
  • Two sets of outside holes are taped 1/4-20 and 45mm or 30 mm apart from each other.
  • The clamp includes two safeties stop relief grooves. This prevents free fall when the clamp is not fully closed, and your plate has safety stops
  • Clamp knobs is captive. Knob stops at maximum opening — cannot be lost in the field.
  • Clamp knob is made from one piece. No spacers or bushing between knob and clamp itself. No room for dust, sand etc to enter inside.
  • Precision C.N.C. machined from 6061-T6 Aluminium
  • Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates.
  • Stainless steel hardware.
  • Black hard coat anodized clamp and clear anodized knob.
  • Made in USA
Plate Specification:
  • 3.56 inch long.
  • 2.560 inch wide.
  • 0.625 inch thick.
  • Weight 4.9 oz (139g

Auction Includes:

  • One adapter plate.
  • One 3.25-inch clamp ( Model F63)
  • Two 1/4-20 x 3/4 screws.
  • Three 10-32 screws
  • Hex key for ¼-20 screw 10-32 screw and original level screw
Shipping Information:
  • Free Shipping with USPS First Class Mail. 
  • Tracking information provided. 
  • USA Costumers please note that USPS packages may travel much longer than the estimated delivery time and tracking information is not always updated daily. 
  • If your order is time sensitive, you need daily tracking update please use FedEx, UPS or Express Mail as delivery service during checkout.