IKO Easyseal / Coldseal Self-Adhesive Vapour Control Layer 

Please choose from the drop down menu length to suit your project

1m / 2m / 3m / 4m / 5m / 6m / 7m or 8m 

All rolls are 1m WIDE

If you have any special requirements length-wise please contact us direct so we can ensure you get the size best suited for you***

***THIS ITEM IS NOT A CAPSHEET / TOP LAYER*****

****IT IS DESIGNED AS A LAYER TO GO UNDER INSULATION ON 'WARM ROOF' ON HABITABLE BUILDINGS****

Product description and Usage..
 

IKO EasySeal self adhesive Vapour Control Layer is a high performance vapour control layer. It is composed of a polyester reinforced aluminium core, coated with a rubber modified, self adhesive bitumen coating. The membrane is protected on the underside with a release film backing and coated on the top surface with a fine mineral finish. A minimum salvage of 75mm width, protected with release film, provides a quick means of completing side laps.

Please note the IKOpro self adhesive bitumen primer will be required in order to activate the adhesion on this product.

Properties
Length : choose from the drop down menu
Width : 1m.
Application : self adhesive.
Base : 170gsm polyester.
Material : bitumen.

Application
Built-up systems including Systems S-A VCL should be installed in accordance with BS 8217: 2005, Code of Practice for built up roofing and to IKO’s specifications Systems S-A VCL is bonded to the substrate by removing the release film on the reverse of the material to expose the self-adhesive coating. All roof decks must be clean and dry, and must be primed with IKOpro Bonding Agent and allowed to dry, prior to the application Systems S-A VCL. As with all self-adhesive membranes, Systems S-A VCL is easiest to apply at a temperature over 10°C.

Side laps of EasySeal SA VCL are self adhesive under normal conditions. However in cold weather or if the self adhesive lap has become contaminated, hot air equipment should be used to ensure the laps are fully sealed. End laps should be heat welded using hot-air equipment. If the VCL is to be left exposed as a temporary waterproofing layer, both side and end laps must be heat welded to ensure they are fully sealed. To assist with installation during cold weather conditions, materials should not be stored on the roof overnight.

Storage
IKO EasySeal Vapour Control Layers should be stored on end, on a clean level surface away from excessive heat and under cover. Self-adhesive membranes should be stored between 5°C -24°C for 24 hours prior to use.

Features
• High tensile polyester base.
• High resistance to damage and delamination.
• SBS bitumen coating low temperature flexibility -20°C.
• Prevents penetration of water vapour and damage to roof construction.

We have got large selection of other roofing products available. Please contact us for more info

If you need large amount of roofing products delivered please enquiry on postage price. We will do our best to ensure lowest delivery price possible .....

We as a business specialize in offering the best available product at affordable price. All products we sell are branded and sold at reduced price (most times by 50% of RRP)

We believe in 100% customer satisfaction, for that reason every item we sell comes with 14 days cooling off period.

If the item does not come up to your expectation please contact us through ebay (my messages) and we will be happy to sort out the matter as we believe giving low DSR or negative feedback does not realy solve the problem. We are always on your side when you are not happy but we are confident our product and service will speak for themself.

Please Note: Return p&p is paid by buyer unless other ways were agreed.