1Pairs Car Styling Whole Body Bumper Sticker BK Material Car Vinyl Decal Sticker Black/Red Waterproof
Description：
Color：Black+Red
Installation method:
1. With a transparent transfer film of small car stickers installation method (dry paste method):
1, Clean the body, keep dry.
2, To determine the need to paste the location. Under normal circumstances, slowly side of the paste, while scraping with a tool, while the end of paper.
3, If the graphics are not large, but also transparent transfer film and stickers all tear off and then paste. But be careful not to accidentally stick.
4, Paste the good, and then repeated scratch several times. Remove the transparent transfer film.
5, In the door and sewing with a knife to draw a knife, inward package Fu paste.
6, Do not let the car stickers and body any separation or protrusion.
Second, with a transparent transfer film of large car stickers installation method (wet paste method):
Tools: wipes, sprinkler, scraper or credit card
1, Clean the body, will be posted on the body parts of the water evenly - to reduce the sticker viscosity, easy to adjust the location.
2, To determine the need to paste the location. Slowly side of the paste, while gently scraping with a tool, while the end of paper.
3, Encountered the door handle or anti-rubbing according to the situation to cut the material and included.
4, The appropriate adjustment, the graphic position to determine the correct, forced repeatedly scraping water and bubbles. Remove the transparent transfer film.
5, In the door and sewing with a knife to draw a knife, inward package service stickers.
6, Do not let the car stickers and body any separation or protrusion.
7, As far as possible in the car stickers in the water dry, the conditions can be moderate heating drying. According to the weather, after a day or two after the car wash.
In order to reduce the difficulty of customer installation, we provide the car stickers have been covered in advance transfer film. (Except for block continuous graphics)
How to clear:
With the nail gently pull the edge of the stickers, and then tear the whole, will not leave marks will not hurt the paint. Winter if the cold can not be scraped corners, hair dryer can be used to properly heat the glue, soft melt can be easily removed after the soft.
Precautions:
1, In the decision to dress up a week before the car do not wax, wax stickers sticky sticky; car stickers paste after three days do not wash, do not stick in the rainy days, so the effect will be bad!
2, Such as stickers need to be posted on the door or other activities need to place, do not worry, paste the post with a knife can be cut.
3, Such as their own really do not want to start, please go to the local place to ask for help in the sun film.
Package Include：1Pairs Car stickers
Color：Black+Red
Installation method:
1. With a transparent transfer film of small car stickers installation method (dry paste method):
1, Clean the body, keep dry.
2, To determine the need to paste the location. Under normal circumstances, slowly side of the paste, while scraping with a tool, while the end of paper.
3, If the graphics are not large, but also transparent transfer film and stickers all tear off and then paste. But be careful not to accidentally stick.
4, Paste the good, and then repeated scratch several times. Remove the transparent transfer film.
5, In the door and sewing with a knife to draw a knife, inward package Fu paste.
6, Do not let the car stickers and body any separation or protrusion.
Second, with a transparent transfer film of large car stickers installation method (wet paste method):
Tools: wipes, sprinkler, scraper or credit card
1, Clean the body, will be posted on the body parts of the water evenly - to reduce the sticker viscosity, easy to adjust the location.
2, To determine the need to paste the location. Slowly side of the paste, while gently scraping with a tool, while the end of paper.
3, Encountered the door handle or anti-rubbing according to the situation to cut the material and included.
4, The appropriate adjustment, the graphic position to determine the correct, forced repeatedly scraping water and bubbles. Remove the transparent transfer film.
5, In the door and sewing with a knife to draw a knife, inward package service stickers.
6, Do not let the car stickers and body any separation or protrusion.
7, As far as possible in the car stickers in the water dry, the conditions can be moderate heating drying. According to the weather, after a day or two after the car wash.
In order to reduce the difficulty of customer installation, we provide the car stickers have been covered in advance transfer film. (Except for block continuous graphics)
How to clear:
With the nail gently pull the edge of the stickers, and then tear the whole, will not leave marks will not hurt the paint. Winter if the cold can not be scraped corners, hair dryer can be used to properly heat the glue, soft melt can be easily removed after the soft.
Precautions:
1, In the decision to dress up a week before the car do not wax, wax stickers sticky sticky; car stickers paste after three days do not wash, do not stick in the rainy days, so the effect will be bad!
2, Such as stickers need to be posted on the door or other activities need to place, do not worry, paste the post with a knife can be cut.
3, Such as their own really do not want to start, please go to the local place to ask for help in the sun film.
Package Include：1Pairs Car stickers
