Belcat Street Box
Digital Sound Styling Guitar Amplifier, 15 Watt, Rechargeable
** Specifications **
OUTPUT POWER: RMS 15W(MAX), Min. 8Ω@5% THD, 1KHz
INPUT IMPEDANCE: 470k Ω
SPEAKER: 5.25(Inch) *2 Custom
Speaker
TUNER: C1 (32.7Hz) ~ A5 (880Hz)
AC/DC ADAPTER: SMPS DC24V 1.2A (Come with the Amp.)
BATTERY: Rechargeable, Lithium-ion 18.5V 2200mAh charge
current 24V 1A. 1 fully charged for over 4 hours using.
BLUETOOTH: 4.0
DIMENSIONS: 25.5~28(H) * 41 (W) * 22 (D) cm
NET WEIGHT: 7.0kg
Operation Manual
** Control Functions **
1.Power: Turns
Amplifier ON / OFF
Simulation Selector: Press
to select desired simulated amps.
Save (user memory): To
Save up to 8 section control settings(Bass, Middle, Treble, Effect, DLY/REV)
a. Turn
on power switch
b. Press
button of timbrel simulation to select alphabet space
c. Set
what you want
d. Press save button(about 2 seconds) after setting
To reset memory
a. Press “Save” button continuously and hold
b. Turn on power switch and hold about “Save” button for about 5 seconds
c. All LED will be blinking by turns, then unpress the button
d. Turn off power switch and Turn on power again
2. GAIN: Sets the amount of gain or
distortion in the overdrive channel, higher setting provide additional
distortion
3. VOLUME: Setting from 0 to full
power
4. TREBLE: Controls the boost
and cut of the upper frequency range
5. MIDDLE: Controls the boost
and cut of the middle frequency range
6. BASS: Controls the boost and cut
of the low frequency range
7. MODE: Select Digital Signal
Processing effects:
a. CHORUS: Will fatten up
the sound of a bass, rhythm guitar, or solo guitar, adds spaciousness
b. FLANGER: This creates a
flanging effect, a sort of spinning sensation with the sound
c. PHASER: an electronic
sound processor used to filter a signal by creating a series of peaks and
troughs in the frequency spectrum
d. TREMOLO: A modulation
effect that rhythmically changes the volume of your signal
8. DEL/REV: To change the function
among “E-ECHO”, “D-DELAY”, “M-DELAY”, “REVERB”
a. E-ECHO: Changing the
level of ECHO
b. D-DELAY: Changing the
time and amount of D-DELAY effects
c. M-DELAY: Changing the
time and amount of M-DELAY effects
d. REVERB: To adjust the
REVERB level
9. EFFECTS(MODE): To change the level of MODE function
10. EFFECTS(DEL/REV): To change the level of DEL/REV function
11. AUX/BLUETOOTH: Bluetooth input volume
settings, from 0 to full power
12. MIC(VOLUME): Adjust the output
volume of the Microphone
13. MIC(TONE): Adjust the output tone of
the Microphone
14. MIC(ECHO): Adjust the output of the
echo sound
15. BLUETOOTH: Turns Bluetooth ON / OFF
a. BASS BOOSTER: Boost a
bass sound
b. MODE SWITCH: 5-Mode sound
switch Flat-Rock-Pops-Classic-Jazz
16. LOW BATTERY: Green-àFully charged / Red-à
Low battery
17. HEADPHONES: To connect stereo headphone.
When using the headphone jack, the amplifier speaker is disconnected.
18. AUX IN: To connect
for accompaniment or other signals, such like CD player, MP3 player…. Non-latching(momentary)
Model FST-11
19. SIMUL FTSW: To change Simulation
pedal channels
20. GUITAR INPUT: To connect with a guitar
21. CHARGE LED: RedàThe amplifier is
being charged
22. CHARGER: Use DC 24V@1.2A
adaptor SMPS(come with the amplifier)
23. MIC INPUT: To connect to microphone
We're a genuine AUS based company offering quality items at prices far cheaper than the high street.
Every item is carefully packaged to ensure safe shipment to you.
Enjoy your visit!