Speedwerx
Hypershift Clutch Kit
For 2016-2019 Arctic Cat Wildcat Sport with stock or aftermarket exhaust
Our Hypershift Clutch Kit for the 2016-2019 Wildcat Sport includes our 6-Series Machined Weights with an Adjustment Kit, a new Primary Spring, a complete Secondary Clutch assembly with a multi-angle helix, and our H5 Alloy Secondary Spring. This kit was designed and rigorously tested by the staff at Speedwerx to insure that it will increase your machine’s acceleration, backshift and all-around performance.
6-Series Machined Weights with Adjustment Kit- Our machined weights come heat treated and black oxide coated to prevent wear and corrosion. These weights are designed specifically for the Wildcat Sport and Trail 700 models with the TEAM primary clutch. They have more tip weight compared to stock for a more aggressive upshift and more belt squeeze. They are also adjustable up to 2.4g more using the threaded hole in the tip of the weight to add the screws and washers included in the adjustment kit- this allows you to dial in the RPM for optimum performance with tires of different sizes or weights, and other modifications
Primary Spring- A different OEM Arctic Cat spring was chosen as the best performing option when used in conjunction with the other components used in the kit.
H5 Alloy Secondary Spring- The same H5 Alloy Secondary Spring that has proven to be a very worthwhile upgrade all by itself was chosen for the full clutch kit because of it's great acceleration, backshift, and engine braking characteristics.
Note: The stock 2016+ Sport secondary clutch has a multi-angle helix, so it is not necessary to replace the clutch to get the best performance out of the machine. For the 2014-2019 Trail and 2015 Sport, see our other listings for a kit that includes a new Sport secondary clutch.
Must specify tire size and elevation when ordering!
Tire Size options- Stock/26" or 27"+
Riding Elevation options- 0-3000 Ft., 3000-6000 Ft., or 6000 Ft.+
Returns- Return authorization
is required for all returns. Contact us for an RA Number, clearly mark the
outside of the package with the RA number, include a copy of the invoice and
write down the reason for the return, and send the package freight prepaid.
Returns are not accepted for items sold at a discount such as closeout,
discontinued, scratch and dent, or used items, items that have been installed
or used, any electrical part, or items purchased 30 days or more prior to the
return request. Returned merchandise must be in the original packaging with all
small parts and hardware originally included, and in brand new condition. A 20%
restocking fee will be charged on all returns, except items that are determined
to be covered under warranty, or in cases where an incorrect item was shipped.
Warranty- Due to the nature of high performance or racing parts, all
items are sold as-is and without warranty unless provided by the original
manufacturer. Items manufactured by Speedwerx/Hot Seat Performance that are
under question of warranty due to defects in materials or workmanship may be
repaired, replaced, or in some cases returned for house credit at our
discretion. Cash refunds are not allowed. We require you to contact us for a
return authorization for all warranty work. Please include a detailed note
explaining the length of time used, cause of failure, and any other relevant
information.
IMPORTANT- READ BEFORE PURCHASING! The high performance products we sell are
not for installation or operation by "consumers" as defined by the
Magnuson-Moss Warranty Act!
DO NOT order any performance parts unless you have the technical ability to
properly set-up the entire machine to compensate for the installation of those
parts. References to "bolt-on" parts only indicates the parts are
removable from the machine (as opposed to machining type modifications)- it is
not meant to imply parts can be installed without additional modification. The
necessary work and expertise needed to install different products varies.
Instructions, where provided, are given to assist in installation only, they
are NOT a substitute for mechanical experience in setting up racing
snowmobiles, watercraft, or land based vehicles. References to performance
gains, reliability, ease of installation, etc. are based on our, and outside
customer's experiences. This is NOT a guarantee of similar performance in every
installation. While we sell proven hardware, in the end it's up to the
individual racer to make the most of that hardware in his/her application.
Best Offer- We put the best offer option on most of our Closeout, Discontinued, Scratch and Dent, and Used items. In most cases, we have done the research and priced these items lower than other sellers on eBay and elsewhere online for the same item, and since these items are usually marked down significantly from the original retail price, there is often little flexibility for further discounts. We may have missed something along the way, so if you have found the same item for less elsewhere, please send us a link to that item and we will see if we can meet or beat that price. We can’t guarantee the lowest price, and may not be able to go any lower than the asking price, but we may be able to work with you on some items. Thank You.