BT-C2000 V2.2 Battery Charger Analyzer Tester
NiMH NiCd AAA AA C D Cells
Charge Test Analyze AA AAA C D NiMH NiCd Batteries
The charger you have been waiting for. Easy to setup and use. Easy to
read backlit display. Flexibility to setup all channels at once, or to
program any channel with any function. Any battery AA AAA.
Charge them, Discharge them, Refresh them, Test them. Even internal
resistance. This charger does it all with ease. Once you use this
charger you will wonder why it took so long to get here, makes other
chargers obsolete.
How long will this set of batteries last in my device?? The BT-C2000
will test your cells for actual capacity, not just what is printed on
the label. This charger will actually put your batteries through a
charge/test cycle and then display exactly their tested capacity. No
more guessing how good those batteries are. You can then use that
information to put together groups of closely matched cells to get the
run time that you expect.
Is this battery any good?? Will this battery take a charge at all?? Use
the BT-C2000 to run it through a charge/test cycle. Find out for sure.
Test internal resistance to see if it can handle the load current. If
the cell does test below expectations you can then run it through a
discharge-refresh cycle to try and bring it back to life. This can
happen when NiMH cells sit unused for an extended period. Due to self
discharge they can become completely depleted. It may take
several cycles to bring them back to life. No problem, the
BT-C2000 does that with ease for AA AAA C and D cells.
Features
* Four indepentent channels can be programmed as group or individually.
* Charge, condition and analyze one to four AA or AAA batteries.
* Charge, condtion and analyze NiMH and NiCd rechargeable batteries.
* Test internal resistance for any 1.5V battery.
* Easy to read large Backlit LCD display.
* Digitally displays capacity, voltage, time elapsed and current.
* Adjustable charging rate from 200 to 1400 mA. (1000 mA max 4 channels)
* Five modes of operation:
o Charge:
o Discharge:
o Discharge Refresh:
o Charge Test:
o Quick Test:
* Negative delta V (-dV) full charge detection.
* 16 bit Delta-Sigma Analog to Digital Converter.
* Four independent battery temperature monitors.
* Second Generation optimized charging circuits and firmware V2.2.
* 12V input powered and can be powered by an optional car adapter.
* Worldwide voltage switching power supply.
* Rugged construction with extensive ventilation for the batteries.
Specifications
Operating voltage 12Vdc. 10V minimum, 16V maximum.
Adapter Power Supply input: 100 - 240 VAC, 50 -60 Hz.
Adatper Power Supply output: 12Vdc 1.0A.
Charge current: maximum 1400 mA, 200 mA increments.
(1000 mA max all 4 channels)
Default charge current 400 mA.
Discharge current range 100 to 500 mA.
Maximum Charging Capacity 20,000 mAh
Operating Temperature: 0 to 40 deg C
Includes:
BT-C2000 Charger V2.2
2 C&D battery adapters
Wall Adapter Power Supply US Plug
Operating Manual