eBay

The dual channel function/arbitrary waveform generator is a high-performance, cost-effective and multi-functional signal generator which integrates the functions of function signal generator, arbitrary waveform generator, pulse signal generator, noise generator, counter and frequency meter. It adopts large-scale FPGA integrated circuit and high-speed MCU microprocessor, the internal circuit uses high-precision active crystal oscillator as the reference, and the signal has high stability. It has completely independent two-way DDS signal and four-way TTL level output, which can generate the preset waveform signals such as sine , square , triangular , sawtooth , pulse , and 64-group user-defined waveforms. The instrument is easy to use, excellent technical index and perfect combination of many functional characteristics in signal , waveform scanning, parameter measurement and use, which helps users complete work tasks faster. Really an excellent testing and measuring equipment for electronic engineers, electronic laboratories, production lines, teaching and scientific research.

Features:
Dual-channel Function: maximum output frequency 60MHz (sine ), 250msa/s sampling rate, 14bits vertical resolution.
High Reliability: DDS direct digital synthesis technology is used to produce accurate, stable and low distortion output signals. Large-scale integrated circuit, surface mount technology, high reliability and has long service life.
Compact & Safety: the device adopts the embedded panel design of ABS plastic shell, which is convenient to integrate with user's equipment and easy to install. All signal outputs can work under load short-circuit conditions 60s or more.
Display Screen: using the 3.2-inch (320*240) color screen to display the waveform parameters of two channels at the same time.
Dual Channel Output: fully independent dual channel output (equivalent to two independent signal sources), which can work synchronously and the phase difference can be precisely adjusted.
Standard Channel Tracking Function: when tracking is turned on, all parameters of the two channels can be updated according to the user's configuration at the same time.
High Frequency Accuracy: frequency accuracy can reach 10-6 orders of magnitude. And the full- frequency resolution is 1μHz(0.000001Hz).
Continuous Adjustable Pulse Width and Frequency of Pulse : the adjustment is 20ns-1s. The pulse amplitude can be continuously adjusted between 0~10V, and the adjustment accuracy is 0.001V.
No Limit: the full of frequency is not divided into gear switches, program-controlled settings.
Scanning Function: it can scan the four properties of the signal: frequency, amplitude, offset, and duty cycle. And has two scanning modes: linear scan and logarithmic scan. The scan time can reach 999.99s, the start and end of the scan can be set arbitrarily.
Burst Output Function: there has manual trigger, internal CH2 trigger, and external trigger for your options, it can output 1~1048575 pulse trains.
Arbitrary Waveform Editing Function: it can edit arbitrary waveform on PC and download to instrument output waveform.
Storage Feature: it can be store 20 groups of instrument state parameters set by users, and call up and reappear at any time.

Specifications:

Frequency Characteristics
Product Model	FY6200-60M
Sine	0~60MHz
Square	0~25MHz
Triangular	0~10MHz
Pulse	0~10MHz
Arbitrary	0~10MHz
TTL/CMOS Digital	0~20MHz
Minimum Pulse Width	20ns(The minimum adjustable width of all typels of pulse can reach 20ns)
Min. Resolution on All Frequency	1μHz (The minimum resolution of the whole frequency band can reach 1μHz, so as to ensure the adjustment accuracy of the instrument at high frequency. For example, it can output 10.000000000001MHz high-precision signal).
Frequency Accuracy	±20ppm
Frequency Stability	±1ppm/ 3 hours
Waveform Characteristics
Waveform Catalog	Sine , square (duty cycle adjustable), pulse (pulse width and cycle time can be accurately set), triangle , rising sawtooth , falling sawtooth , CMOS , DC level, half , full , positive ladder , anti ladder , exponential rise, exponential fall, Lorentz pulse , multi sound , irregular noise , ECG , trapezoid pulse , cinke pulse , narrow Pulse , Gaussian white noise , amplitude modulation , frequency modulation , and 64 user-defined waves.
Non-Volatile Storage (64)	64 user-defined arbitrary waveforms can be stored
Waveform Length	8192 points (8K points) * 14bits
Sampling Rate	250MSa/s
Vertical Resolution	14 bits
Sine	Harmonic Suppression System	≥50dBc(<1MHz); ≥45dBc(1MHz~20MHz);
	Total Harmonic Distortion	<0.5% (20Hz~20kHz,0dBm)
Square and Pulse	Rising and Falling Time	≤7ns (VPP<5V)
	Overshoot	≤5%
	Duty Cycle Adjustment	0.01%~99.99% (Resolution 0.01%)
Sawtooth	Linearity	>98% (0.01Hz~10kHz)
Output Characteristics
Amplitude (VPP)	Frequency≤10MHz	10MHz<Frequency≤20MHz	Frequency>20MHz
	1mVpp~20Vpp	1mVpp~10Vpp	1mVpp~5Vpp
Amplitude Resolution	1mV
Amplitude Stability	±0.5%/ 5 hours
Amplitude Flatness	±5%(<10MHz);±10%(>10MHz);
Waveform Output
Output Impedance	50Ω±10% (Typical)
Protection	All signal output terminals can work for more than 60s under the load short circuit condition
DC Offset
Offset	Frequency≤20MHz: ±10V; Frequency>20MHz: ±2.5V
Offset Resolution	1mV (Minimum)
Phase Feature
Adjustable	0~359.99°
Minimum Resolution	0.01°
TTL Output
TTL Level Amplitude	>3Vpp
Fan-out Coefficient	>8 TTL load
Rise/Fall Time	≤10ns
CMOS Output
Low Electric Level	<0.3V
High Electric Level	1V~10V
Rise/Fall Time	≤18ns
External Measuring Function
Function	It can measure Frequency, Period, Positive/Negative Pulse Width, and Duty Cycle of external signal
Input Signal Voltage	2Vpp~20Vpp
Function of Frequency Meter	Frequency Measurement	0.01Hz~100MHz
	Measurement Accuracy	Gate time 1s, 10s, 100s three speed regulation
Counter Function	Counting	0-4294967295
	Counting Mode	Manual
Pulse Width Measurement	10ns Resolution, Maximum measurable 20s
Cycle Measurement	10ns Resolution, Maximum measurable 20s
Function
Carrier Waveform	Sine , square , sawtooth , arbitrary (excluding DC voltage)
Type	Linear , logarithmic
Direction	Forward, reverse, round trip
Object	Frequency, amplitude, offset, duty cycle
Time	0.01S~999.99S/stepping
Setting	Arbitrary setting of start point and end point
	Determined by parameter setting value
VCO (Voltage Control Output) Function
Modulation Signal to Input	0~5V
VCO Signal Frequency	0-1000Hz
VCO Control Object	voltage controlling frequency (VCF), voltage controlling amplitude (VCA), voltage controlling bias, voltage controlling duty ratio
VCO Feature	Amplitude Modulate (AM) or Frequency Modulate (FM) can be performed by an external analog signal
Modulation Function
Modulation Type	AM, FM, PM, ASK, FSK, PSK
Carrier Waveform	Sine , Square , Triangle , Sawtooth , Arbitrary (Except DC voltage)
AM
Source	Internal (CH2) / External (counter)
Modulation Waveform	Sine , Square , Triangle , Sawtooth , Arbitrary
Modulation Depth	0% to 100%
Modulation Frequency	Internal: 1μHz~1MHz; External: 1μHz~2KHz;
FM
Source	Internal (CH2) / External (counter)
Modulation Waveform	Sine , Square , Triangle , Sawtooth , Arbitrary
Modulation Frequency	Internal: 1μHz~1MHz; External: 1μHz~2KHz;
PM
Source	Internal (CH2) / External (counter)
Modulation Waveform	Sine , Square , Triangle , Sawtooth , Arbitrary
Phase Shift	0°~360°
Modulation Frequency	Internal: 1μHz~1MHz; External: 1μHz~2KHz;
ASK
Source	Internal (CH2), Manual
Modulation Waveform	50% duty cycle square
Keying Frequency	1μHz~10MHz
FSK
Source	Internal (CH2), Manual
Modulation Waveform	50% duty cycle square
Keying Frequency	1μHz~10MHz
PSK
Source	Internal (CH2), Manual
Modulation Waveform	50% duty cycle square
Keying Frequency	1μHz~10MHz
Burst Function
Carrier Waveform	Sine , Square , Triangle , Sawtooth , Arbitrary (Except DC voltage)
Pulse Count	1~1048575
Burst Mode	Manual burst, Internal burst (CH2), external burst (counter)
General Specifications
Display	Type	3.2-inch, TFT color LCD display
Storage and Load	Quantity	20 sets
	Location	01 to 12 (power on by default to enter 01 storage location parameters)
Connector	Interface Mode	USB to serial interface
	Communication Rate	115200bps
	Communication Protocol	Using the command line, the agreement is open
Power Supply	Voltage	AC100V~240V
Manufacturing Technique	Surface mount technology, large scale integrated circuit, high reliability and long service life
Warning Tone	Users can turn on or off through program settings
Operational Characteristics	All buttons are operated, and the knob is adjusted continuously.
Environment Condition	Temperature: 0~40℃, Humidity: ﹤80%
Plug Type:	EU Plug / US Plug / UK Plug (Optional)
Item Size	150 * 105 * 30mm / 5.91 * 4.13 * 1.18in
Item Weight	516g / 18.23oz
Package Size	644g / 22.71oz
Package Size	19.5 * 17 * 7.5cm / 7.68 * 6.69 * 2.95in

Package List: E10292US
1 * Signal Generator
1 * Power Cable
1 * USB Data Cable
1 * BNC-BNC Cable
2 * BNC-Clip Cable

Welcome to my shop

Product Overview

Detail