Product Description:
New Hejnar Photo conversion set for Manfrotto MVH500 Video Head. This combination of plate and clamp will let you use Manfrotto head with any arca swiss equipment. Manfrotto MVH500AH head represents an advance over the popular 501HDV, with sturdier construction and featuring Manfrotto's patented bridging technology. Manfrotto MVH500 use Manfrotto clamping system. Arca-swiss plate fans can now bypass this and use MVH500 with Arca type plates and L brackets. Arca type clamp mounted on MVH 500 can disconnected from plate and use independent on other equipment if needed. Clamp can be positioned in relation to adapter plate in 90 degree increments to make it convenient for everybody. It is the best quick release system for tripods and monopods. International standard dove-tail clamp, compatible with Arca-Swiss type quick release plates.
Adapter plate is attached to Manfrotto head with the same 4 screws as original top mounting plate.
1) remove 4 original screws with provided hex key.
2) Connect adapter plate to head using original screws.
Compatible with:
Clamp Specification:
- 3.25 inch long clamp
- Socket is countersunk on top for 1/4-20 screw but also threaded 3⁄8”-16.
- Two set of outside holes are taped 1/4-20 and 45mm or 30 mm apart from each other.
- Clamp includes two safety stop relief grooves. This prevents free fall when the clamp is not fully closed and your plate has safety stops
- Clamp knob is captive. Knob stops at maximum opening — cannot be lost in the field.
- Clamp knob is made from one piece. No spacers or bushing between knob and clamp itself. No room for dust, sand etc to enter inside.
- Made from 6061-T6 Aluminum.
- Black hard coat anodized clamp and clear anodized knob.
- Made in USA.
Auction Includes:
- One adapter plate.
- One 3.25 inch clamp ( Model F63)
- One 1/4-20 x 3/4 screws.
- Two 10-32 screws
- Hex key for ¼-20 screw 10-32 screw and plate original screws