details:
This
is a quality remanufactured /rebuilt brake booster for the 93 Mustang
Cobra fitment. It comes with a new vacuum check valve installed (some
black plastic, some black & gray).
It is listed to fit the 93 Mustang Cobra. It will also work on the
1987-1993 Mustang when performing a SN95 or 1993 Cobra brake conversion.
With some extra provisions you can get it to work on the earlier 79-86
cars. This booster is larger than the earlier 87-93 non-Cobra booster
and will provide additional brake assist for your larger brake upgrade.
Depending on your year and model you may need to make a fitment
provision to get this to properly bolt-up to your firewall. This is more
of an issue for the earlier 79-86 cars. Also it does not come with any
retaining nuts. Depending on your model year you may be able to reuse
your original retaining nuts. Also reuse your original master cylinder
retaining nuts. Worst case you will need to obtain the correct retaining nuts, lock washers etc. Direct fitment for the 93 Mustang Cobra.
Please be aware that the pictures are only representative. Some minor variations may exists. Read below.
Pictures & the finish:
There may be minor variations to the posted pictures. Posted pictures
are from from recent sales of the actual booster although they normally
all look similar. First 6 pictures are from one of our recent sales.
Because they are a rebuilt original booster, some may have minor marks
from handling and working on them. They do a nice job but they are
working with original factory cores that can be up to 25+ years old at
this point. Some may show signs of where there was rust on the case.
This can be a common problem on a booster when there was an old brake
fluid leak or fluid spillage. Brake fluid can quickly remove paint and
then the bare metal can start to rust. If left unprotected long enough
you will have minor pitting to the finish. When they rework them you may
see some of these signs of prior rusted or pitted areas. If you paint
the booster with a quality paint it will minimize any of these blemishes
to the finish. All have been blasted and painted as shown but I would
not call them show-car quality. Just want to point this out ahead of
time. We will list updated photos when possible. Contact me with
questions prior to your purchase. Happy to assist.
Shipping:
We normally will ship via USPS or FedEx at our discretion depending
upon your location. Contact me prior to your purchase if you have
questions. Happy to provide some actual photos prior to your purchase.
We are here to help.
Additional Description Details