Detailed Description:

Max Water XLP-4040 2400 GPD Commercial RO Membrane

Specifications

  • 2400 Gallon Per Day Membrane for Commercial Reverse Osmosis systems.
  • Certified to ISO 9001 Standards
  • Removes particles down to 1/10,000th of a micron (removing 98% of impurities including organic, inorganic contaminates, chemicals, ETC.).

Membrane Features

  • Provides stable, high rejection of contaminates even with high TDS water sources.
  • Advanced membrane technology with innovative thin layer composite membrane design.
  • More consistent performance with less fouling requiring less frequent cleaning and change outs.
  • 100% dry-stored membrane maximizing shelf life.

General Information

  • The first full tank of permeate should be discarded, DO NOT use this initial permeate for drinking water or food preparation as it may contain carbon fines and manufacturing by-products.
  • Keep membrane moist at all times after initial wetting.
  • To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution.
  • The membrane shows some resistance to short-term contact with chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided.
  • If operating limits and guidelines given in this bulletin are not strictly followed, the limited warranty will be null and void.
                                             
Usage 


It is applicable to the desalination of municipal water, groundwater with salt concentration less than 1000ppm. It can be widely used in pure water preparation and related industries. 

Specifications & Parameters 
Model Active   Membrane Area ft2(m2) Permeate   Flow GPD(T/D) Stable   Rejection Rate (%)
XLP-4040 85(7.9) 2400(9.1) 99.2
Standard Test Condition 
Concentration   of Solution (NaCl) Temperature（℃） pH   Value > Operating   Pressure psi(MPa) Recovery   Rate（%）
500ppm 25 7.5-8 100(0.69) 15

Notes: The permeate flow of single membrane element may vary with in ±15%.

Operating Limits and Conditions of Membrane Element: 

Max.Working Pressure 600 psi(4.14MPa)
Max. FeedWater   Temperature 45 ℃
Max. Feed Water Flow 3.6m3/h
Max. FeedWaterSDI15  5.0
Free Chlorine Concentration of   FeedWater 0.1mg/L
pHRange of FeedWaterDuring Continuous Operation 2-11
pHRange of FeedWaterDuring Chemical Cleaning 1-13
Max. Pressure Drop of Single   Membrane Element 15psi(0.1Mpa)


XLP-4040 Reverse Osmosis Membranes for many Applications such as:

  • Car Washes 
  • Whole House Reverse Osmosis 
  • Commercial Reverse Osmosis 
  • Agricultural 
  • Industrial  

    • Commonly referred to as: Extra Low Pressure, Extra Low Energy, Ultra Low Pressure, or Ultra Low Energy  

    4" x 40" Fits nearly all standard 4" x 40" Membrane housings stainless steel, PVC, or Fiberglass 

This is compatible with the following common Brands and part numbers as well as others: 

  • Dow Filmtec 4040 - Low pressure lines XLP, XLE 
  • Vontron ULP-4040 
  • CSM 4040 
  • Hydranautics  
  • Axeon HF4 and HF5 Series 

This is not a Brackish water membrane.   

  • It is designed to work best in water that is under 2500 ppm TDS. 
               
                maxwater-terms