========================================================================================================
The UnoCart-2600 is an open source SD-card multicart for the Atari 2600.
Use the joystick or the SELECT/RESET keys to navigate the SD card and select a title to play.
PAL/NTSC/PAL60 Configuration
The micro-switch under sd slot allows you to select whether the cartridge uses NTSC or PAL/PAL60 for the
built-in menu.
Note that this feature only applies to the cartridge menu (and also to the Supercharger BIOS if you are using a
Supercharger cartridge type). Once you select a ROM to emulate, the TV picture produced will be entirely
dependent on the cartridge being emulated. In general there were separate PAL and NTSC versions of each
cartridge – make sure you get the correct version.
The UnoCart-2600 menu can be set to display in NTSC, PAL or PAL60 changing position of micro switch, no jumper to move!!!!
SD card should be formatted as FAT or FAT32 **
The UnoCart-2600 can emulate most banking schemes:
ROM Files
The UnoCart uses cartridge detection signatures from the Stella Atari 2600 emulator to auto-detect all common
cartridge types.
If a file has an extension of .BIN, .ROM or .A26 it will be auto-detected.
If you want to force the
cartridge to be emulated as a specific type, you can use the appropriate file extensions.
Menu
The menu allows you to navigate the files on the card and select a title to use. Joystick up and down will move
through the items one at a time. You can also use joystick left and right to move to the previous or next page. Press
fire to select an item. You can also use the SELECT button on the console to move to the next item, and RESET to
select an item, if you don’t have a joystick plugged in.
Compatibility
The UnoCart-2600 should be able to emulate every cartridge released during the commercial life of the 2600.
Newer homebrew titles should also be compatible with the UnoCart-2600, unless they use the DPC+ co-processor
features specific to the Harmony/Melody cartridge. Note that the DPC support on the cartridge is not complete but
it is sufficient to play Pitfall II.
Firmware can be updated directly from the sd.
Download update.bin to your SD card and launch the update from the menu.
Download new firmware (if available) here:
https://github.com/DirtyHairy/UnoCart-2600/releases
Credits
Original idea, hardware and firmware by Robin Edwards (electrotrains at atariage).
Additional cartridge support and firmware additions by Christian Speckner (DirtyHairy at atariage).
LEGGERE CON ATTENZIONE / READ CAREFULLY
PER FAVORE, NON CHIEDETEMI SE HO SPEDITO. HO INSERITO UN LUNGO TEMPO DI PREPARAZIONE E SPEDIZIONE MA DI SOLITO SPEDISCO PRIMA.
PLEASE DON'T ASK ME IF I HAVE SHIPPED. I HAVE ENTERED A LONG PREP AND SHIPPING TIME BUT I USUALLY SHIP EARLIER.
3D PRINTING MAY HAVE SOME SLIGHT DEFECTS, COLOR OF THE SHELL MAY VARY ACCORDING TO AVAILABILITY.