Our Kozy Heat 600-1 fan kit is designed to fit several models of gas and wood Kozy Heat fireplaces. The kit is hand assembled and tested in our Racine, Wisconsin factory and includes two of our sealed ball bearing blower assemblies. The blowers are mounted to separate galvanized steel brackets to eliminate rusting and have pre-installed noise reduction pads to eliminate any metal on metal contact. The kit also features both an integrated variable speed controller and automatic thermostat sensor. The rheostat allows infinite control of the blower through the entire RPM range, so you'll be able to conveniently control both air flow and noise. Additionally, the thermostat is mounted to a magnetic bracket that allows for easy mounting and installation. The sensor will turn the blower on and off automatically based on the surface temperature of your fireplace. If you have a dedicated wall switch for the blower, you'll leave the wall switch in the "ON" position and let the thermostat take over.
Upgraded ELITE blowers are now available!! Rather than using the standard tangential squirrel cage blower, you can now upgrade your 600-1 kit with more heat efficient centrifugal blowers. These blowers eliminate a common failure point on the original 600-1 blowers, which is the outside bearing behind the rubber end cap. 100% high temp treated ball bearing motors with Class H insulation, high temperature grease and properly set and pinned metal wheels. Besides their high temperature application, the benefit of centrifugal blowers over their tangential counterparts is that they're also more quiet. We've dB tested these at nearly 6dB quieter for each blower.
Replaces Rotom HB-RB6001. Adding a 600-1 blower kit to your Kozy Heat fireplace can dramatically improve its efficiency! By helping to circulate the fireplace's heated air into your room, you're reducing wasteful heat loss through the chimney and venting. The kit is affordable, easy to install, efficient, powerful and will transform your fireplace into a better heating appliance.
Specifications
|
|
---|---|
Dimensions | |
L x W x H (with bracket) | 10.5" x 4.0" x 3.5" |
L x W x H (blower only) | 9.75" x 3.73" x 3.23" |
Air Discharge | 7.13" x 1.375" |
Blower, Motor & Bearing | |
Type | AC Shaded Pole |
Rotation | CW/CCW (Left & Right Blowers) |
Blade Type | Metal |
Housing Material | Aluminum |
Bearing Type | Ball |
Outboard Bearing Type | Ball |
Bearing Lubrication | High Temp |
Motor Insulation | Class H (rated to 392°F) |
Motor RPM | 3000 |
CFM | 230 |
Installation | |
Mounting Type | Bracket for each blower with included hardware |
Electrical | |
Volts | 115 |
Motor Frequency | 60 Hz |
Watts | 52 |
Amperage | 0.45 |
Power Cord | Yes |
Power Cord Length | 3 ft |
Power Cord Type | 3-prong grounded |
Accessories | |
Rheostat Variable Speed Controller | Yes. Inline full range rheostat with on/off position. Mounts below the fireplace. |
Thermostat | Yes |
Thermostat Type | Magnetic bracket with Selco sensor |
Thermostat Temperature | 120° / 90° |
Other | |
Packaging Materials | Shipping box, bubble wrap, foam |
Compatibility | |
Kozy Heat | 231 (231-B, 231-G, 231ZC), 241ZC, 932 DV, 936 DV, 942 DV, 961 DV, SP36, Z-42 (Z42, Z-42, Z-42-CD) |
Documents | |
Installation Instructions | Download |
Video Library | Watch Now |