4:1 Megaphone type for OLDER model Kerker type replacement baffle
These are genuine NOS MAC Baffles.
also available Black finish.
See Item ID: 221712390821
with modification this can also fita MAC 2:1 megaphone system
for CB350 twins!
PLEASE NOTE: in most cases these fit very well in the older Kerker Exhausts,
but sometimes the screw hole at the cone tip does not quite line up.
If it is not too far off, a rubber mallet used with finesse, can get it in.
Otherwise, just drill a new screw hole
..MAKE SURE YOU MEASURE
FOR YOUR APPLICATION!
BUYER WILL PAY Original and Return shipping
+ 20% restocking fee, - if you don't measure correctly!
These are not used baffles, they are brand new!
(the inside diameter of the open part all the way
down the length of the baffle.)
Note that the actual ID of the tip at the end
of the baffle is 1 1/4" or 32mm,
... as the metal is rolled inward, right at the tip.
Here's another measurement:
1 7/16" or 37mm is the OD of the core,
the part where you would wrap the
baffle core with fiberglass.
Regarding the screw hole:
PLEASE NOTE: in most cases these fit very well in the older Kerker Exhausts,
but sometimes the screw hole at the cone tip does not quite line up.
If it is not too far off, a rubber mallet used with finesse, can get it in.
Otherwise, just drill a new screw hole
..MAKE SURE YOU MEASURE
FOR YOUR APPLICATION!
BUYER WILL PAY Original and Return shipping
+ 20% restocking fee, - if you don't measure correctly!
These are not used baffles, they are brand new!
-
Vintage Kerker Megaphone replacement baffle.
- Not canister style
- Big end is 95mm or 3-3/4"
- Small end is 77mm or 3"
-
Length 11"
-
Made in the U.S.A. by MAC performance
- Raw steel
- PLEASE NOTE: in most cases these fit very well in the older Kerker Exhausts, but sometimes the screw hole at the cone tip does not quite line up. If it is not too far off, a rubber mallet used with finesse, can get it in. Otherwise, just drill a new screw hole...
- DOES NOT FIT MOST LATER MODEL KERKERS, YOU MUST MEASURE!!!
(the inside diameter of the open part all the way
down the length of the baffle.)
Note that the actual ID of the tip at the end
of the baffle is 1 1/4" or 32mm,
... as the metal is rolled inward, right at the tip.
Here's another measurement:
1 7/16" or 37mm is the OD of the core,
the part where you would wrap the
baffle core with fiberglass.
Regarding the screw hole:
the metal is too thin to have threads.
intended for metal type coarse screw,
But I like to use a small bolt with locktite or locknut.
You get ONE (1) baffle per order!
---------------------------------------------------------
Q: does it come with fiberglass muffler packing/wrap?
A: No, the baffle comes as shown in the pics, Not wrapped, and no wrap/packing comes with it, sorry.
Some people don't pack them, but it is louder without it.
depends on the bike, and your tolerance to volume.
what is loud to me is not always loud to another guy, lol!
I usually use packing. -makes it quieter.
sorry, packing is not included.
Q: Will this fit my 19XX Bike with a Kerker or aftermarket header/exhaust can or megaphone?
A: It might, since i don't have access to your bike to confirm,
you should probably take measurements,
and compare with the specs given in the listing ~ Just to be sure!
best of luck with your bike!
and compare with the specs given in the listing ~ Just to be sure!
best of luck with your bike!
---------------------------------------------------
actual ebay feedback:
This item fit perfectly in my 1973 CB750 Kerker exhaust. Thank you
KERKER MAC Replacement Baffle Baffles Megaphone Exhaust 4:1 - CB350 2:1 RAW Fnsh
Very good seller.Thank you very much.
| | During past month | |
| KERKER MAC Replacement Baffle Baffles Megaphone Competition Exhaust Muffler 4:1 |
Fit my kerker megaphone perfect. thx
| During past month | ||
| KERKER MAC Replacement Baffle Baffles Megaphone Competition Exhaust |
Great ebayer and seller. Really nice product.
| During past month | ||
| KERKER MAC Replacement Baffle Baffles Megaphone Competition Exhaust Muffler 4:1 |
Very good ebay experience!!!!!!!!! | During past month | |
| KERKER MAC Replacement Baffle Baffles Megaphone Competition Exhaust Muffler |
| quick shipping, product is as described!!!!!!!!!!!! | During past month | |
| KERKER MAC Replacement Baffle Baffles Megaphone Competition Exhaust Muffler |
| great seller!!!!!!!!!!!! | During past month | |
| KERKER MAC Replacement Baffle Baffles Megaphone Competition Exhaust Muffler |
| wow!! great fit and takes all the drone out when cruising on my vmax with the 4-1 | Past 1 month | |
| KERKER MAC Replacement Baffle Baffles Megaphone Competition Exhaust Muffler |
| Fast Shipping,Good Communications,Great E-Bayer,Thanks,A+++++++++++++++++ | Jul-28-14 12:28 | |
| KERKER MAC Replacement Baffle Baffles Megaphone Competition Exhaust Muffler |
| Great seller! Fast shipping! | Jun-25-14 12:18 | |
| KERKER MAC Replacement Baffle Baffles Megaphone Competition Exhaust Muffler mufflers |
-------------------------------------------------------------------------------------------------------------------------------------------------------
Contact me with any problems.
Please contact me before leaving neutral or negative feedback!
I have a 100% feedback rating !
as always, ask questions first before buying!
I do warranty the product for 14 days-
if returned, For reasons other than defective item,
buyer will pay the original shipping cost, as well as return shipping costs.
if returned, For reasons other than defective item,
buyer will pay the original shipping cost, as well as return shipping costs.