BRAND NEW AND UNUSED 2.25”(57.15 mm) OD. 304 Stainless Steel 180 Degree Exhaust Pipe Mandrel Bend

MATERIAL – 304 Stainless Steel Mill Finish

OUTSIDE DIAMETER – 57.15mm 

WALL THICKNESS – 1.5mm

CENTRELINE RADIUS (CLR) – 85.7mm (1.5D)

BEND ANGLE – 180 Degrees

STRAIGHT LEG LENGTH – 150mm minimum

BENDING TECHNIQUE – Mandrel Bent

1.5D CLR Bend 

ALL BENDS ARE MADE FROM BRAND NEW, UK BOUGHT STAINLESS STEEL

 THIS IS IDEAL FOR AIR INTAKE SYSTEMS, INTERCOOLER PIPES, WATER PIPES, EXHAUST SYSTEMS AND ANY OTHER APPLICATION YOU MAY HAVE.

Why buy mandrel bends?

Mandrel bends maintain the same internal diameter all the way through the bend.

Crush bends are just like they sound; the piping is crushed slightly while bending, decreasing the ID of the pipe.

Mandrel bent is the preferred method, but requires special equipment. Virtually all of your local exhaust shops can only crush bend.

A truly excellent exhaust can make a big difference to performance. You want to maintain velocity of the exhaust gases with as little restriction as possible. The reason is the scavenging effect on your engine. What this means is that with an excellent system, each exhaust pulse, as it races through the piping, leaves a slight vacuum behind it to help suck the exhaust out of the next cylinder when the exhaust valve opens. This helps make your engine more efficient. You want to pull in all of the air possible, and pump all of the exhaust fumes out.

As you introduce restrictions to the exhaust, you begin to reduce the scavenging effect because you don't maintain the same velocity through the system.

If you have ANY QUESTIONS then PLEASE message us via eBay or alternatively email us before buying. We will be more than happy to answer them!

Please feel free to send any bespoke drawings through to us – we are very experienced in creating custom projects/applications. We can then put up a new item on eBay with an agreed price for that particular job so that you can continue buying in a safe environment.

PRICE GUARANTEE

Tube Bender Limited will not be beaten on price, whether it’s for one, 10, 100 or 1,000 parts! If you can email us over a quote you have received or a link to a price you have seen – we can guarantee to beat it by at least 10%!