LiFud LED Driver
MerryTek Microwave Motion Sensor
Slim LED Ceiling Lights
A unique ceiling or wall lighting solution to illuminate rooms in your home and also in commercial settings. Low energy consumption with extremely long lifespan of 50,000 hours that reduces re-lamp frequency.
Specifications
• Material: Top Quality PC
• Light Colour: Tri-Colour (WW+NW+DW)
• Beam Angle: 160 Degrees
• Input Voltage: AC220-240V 50Hz
• Lifespan: 50,000 Hours
• Warranty: 2 Years
Model Comparisons
IP44 rated model is suitable for any room including bathroom.
IP65 rated is waterproof and sealed for any dust and water particle, which is suitable for both indoors & outdoors.
|
|
|
|---|---|---|
Rubber GasketContains in the IP65 model, sealing the unit for waterproofing. | Screws SealedIP65 model uses screws to fully sealed the unit with metallic screw wiring hole. | MaterialIP65 model is made of durable harden Polycarbonate (PC), specially design to combat changing weather conditions, while also shatter-proof. |
Specifications
| Model | Standard | Microwave Sensor | Emergency | Microwave Sensor+Emergency | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wattage | 18W | 18W | 18W | 18W | ||||||||
| Light Colour Temperature | 3000K | 4000K | 6000K | 3000K | 4000K | 6000K | 3000K | 4000K | 6000K | 3000K | 4000K | 6000K |
| Lumen (For IP44/IP54 Models) | 1210 lm | 1485 lm | 1386 lm | 1210 lm | 1485 lm | 1386 lm | 1210 lm | 1485 lm | 1386 lm | 1210 lm | 1485 lm | 1386 lm |
| Lumen (For IP65 Models) | 1267 lm | 1550 lm | 1412 lm | 1267 lm | 1550 lm | 1412 lm | 1267 lm | 1550 lm | 1412 lm | 1267 lm | 1550 lm | 1412 lm |
| Dimension | 285(⌀)x70(H)mm | 285(⌀)x70(H)mm | 285(⌀)x70(H)mm | 285(⌀)x70(H)mm | ||||||||
| Built-in Microwave Motion Sensor (Brand: MerryTek) | No | ✓ | No | ✓ | ||||||||
| Emergency Function | No | No | ✓ | ✓ | ||||||||
| Sensor Override Function | No | ✓ | No | ✓ | ||||||||
| Built-in Battery | No | No | ✓ | ✓ | ||||||||
| Built-in LED Driver (Brand: Lifud) | ✓ | ✓ | ✓ | ✓ | ||||||||
Built-In 3 Colours
There are three colours built-in the ceiling light, which enables you to change colours arbitrarily.
|
|
|
|
|---|---|---|---|
How to change the light colour? Open the cover and adjust the colour temperature from the K2 switch. | 3000KWarm White | 4000KNeutral White | 6000KDay White |
Microwave Motion Sensor
How to set the sensor?
|
|
|
|
|---|---|---|---|
Step 1 Open the cover to adjust the microwave setting. By selecting the combination on the DIP switch, sensor data can be precisely set for each specific application. | Detection AreaDetection area can be reduced by selecting the combination on the DIP switches to fit precisely each application. | Hold TimeRefers to the time period the lamp remains at 100% illumination after no motion detected. | Daylight SensorThe sensor can be set to only allow the lamp to illuminate below a defined ambient brightness threshold. When set to Disable mode, the daylight sensor will be unavailable and the light will not light up until motion was detected. 50lus, 25lux: twilight operation, 10lux, 2lux: darkness operation only. |
Emergency Setting
Sensor Override Function
Switch the unit ON and OFF 3 times within 2 seconds to override the sensor.
The light will then remain ON and will not go OFF until you manually turn it OFF at the switch.
To return to sensor mode, simply turn the light switch OFF and back ON.
Initialisation
When first installed and turned on, the sensor automatically turns the light on at 100% brightness.
After 10 seconds, the light will turn off. During the initialisation, the sensor is not active and will not detect any movement.
Installation
|
|
|
|---|---|---|
Step 1 Unscrew the installation plate from the lamp and disconnect the wires from the terminal block. | Step 2Connect the utility supply to the terminal block (L for Live wire, N for null wire) on the installation plate. Fix installation plate to ceiling/wall with screws. | Step 3Connect the wires from the lamp to the terminal block and fix the lamp to the installation plate. After the installation, turn the unit on from K1 switch. |
IP44 rated, suitable for any room including bathroom.
Premium LED Ceiling Lights
A unique ceiling or wall lighting solution to illuminate rooms in your home and also in commercial settings.
Specifications
• Material: Top Quality PMMA Acrylic
• Beam Angle: 160 Degrees
• Colour Temperature: 4000K or 6000K
• Input Voltage: AC220-240V
• Lifespan: 50,000 Hours
• Warranty: 2 Years
| Model | Standard | Microwave Sensor | Microwave Sensor+Emergency |
|---|---|---|---|
| Wattage | 24W | 24W | 24W |
| Lumens | 1920Lms | 1920Lms | 1920Lms |
| Dimension | 330(D)x65(H)mm | 330(D)x65(H)mm | 330(D)x65(H)mm |
| Microwave Motion Sensor | No | ✓ | ✓ |
| Emergency Function | No | No | ✓ |
| Built-in Battery | No | No | 7.4V 2200mAh (Emergency Duration: ≥3Hrs) |
Microwave Motion Sensor
How to set the sensor?
|
|
|
|
|---|---|---|---|
Step 1 Open the cover to adjust the microwave setting. | Detection AreaDetection area can be reduced by selecting the combination on the DIP switches to fit precisely each application. | Hold TimeRefers to the time period the lamp remains at 100% illumination after no motion detected. | Daylight SensorThe sensor can be set to only allow the lamp to illuminate below a defined ambient brightness threshold. When set to Disable mode, the daylight sensor will be unavailable and the light will not light up until motion was detected. 50lus, 30lux: twilight operation, 10lux, 5lux: darkness operation only. |
Emergency Setting
Installation
|
|
|
|
|---|---|---|---|
Step 1 Twist diffuser anticlockwise to remove from lamp body. | Step 2Push the latch to the open position to open the LED board. | Step 3Thrust screws through the Waterproof rubber mat screw holes to fix lamp to ceiling/wall. Connect wires to the lamp via the designated waterproof rubber mat wire hole. | Step 4Shut the LED board, make sure the latch is in the close position. Return the diffuser to the lamp by twisting it clockwise onto the body of the lamp. |
• 1 x Fix Kit
|
|
|
|
|---|---|---|---|
About UsG.W.S LED is a UK-based developer and manufacturer of LED lighting, offering a broad variety of LED products for lighting professionals as well as end users. Our products undergo a certified quality standards procedure to make sure we only stock items with the newest and most reliable technology. | PaymentOur preferred method would be Paypal but we can also accept all major credit/debit cards payment and direct bank transfers. If you use e-cheque on PayPal, delivery may take longer, as we will not be able to process your order until the e-cheque clears. We are a VAT registered company so a VAT receipt can be provided with your purchase. | ShippingItems will be shipped within 1-2 business days (Monday-Friday) following order completion. We offer Free UK Standard Delivery. However, if you simply can’t wait to get your hands on the product, we have Express Delivery option available for you. | ReturnsIf the items we sent to you is incorrect, or your items have arrived with a manufacturing defect, please contact us within 14 days where we will always offer you the choice of an exchange or refund. If you wish to return unused goods for refund or exchange, they must be returned with their original packaging within 30 days. We will only pay the postage price for any goods that need to be resent due to a fault on our behalf. |
