SKYRC iMAX B6 Mini 60W Balance Charger Discharger for 1-6S LiPo i-ion LiFe LiHV Nimh Nicd PB RC Drone Battery
Features:
1.Lithium battery meter.
2.Battery internal resistance meter.
3.Re-peak mode for NIMH/NICD battery.
4.Terminal voltage control.
5.PC control& firmware upgradable.
6.Smart phone control& monitor via WI-FI module (SK-600075 optional part,but WIFI module not in it).
Descriptions:
SkyRC IMAX B6 mini is smaller but with bigger power, and new features and functions are integrated.SkyRC B6 mini charger is a high-performance, micro-processor controlled charge/discharge station with battery management suitable for use with all current battery types, with integral equalizer for six-cell Lithium- Polymer (LiPo), Lithium High Volage(LiHV),Lithium-Ferrum (LiFe) and Lithium-Ion (LiIon) batteries; maximum 6A charge current and 60W charge power.
![](https://img1.tongtool.com/s/hfhlijopfjhiqehmfjnnnkphqihqljhhkjhgAGxM.jpg)
![](https://img1.tongtool.com/s/vtvzwxCDtxvwEsvAtxBBByDwvBEwEwCzwzzuOULH.jpg)
![](https://img1.tongtool.com/s/OMOSPQVWMQOPXLOTMQUUURWPTQURVOWVVSSN4a1I.jpg)
Specifications:
Brand: SKYRC
Item Name: B6 Mini
Operating voltage range: DC 11.0-18.0 V
Circuit power: Max .charge power 60W
Max .discharge power 5W
Charge current range: 0.1-6.0A
Discharge current range: 0.1-2.0A
Li Po/Li Fe/Li Ion Cells : 1-6S
NICD/NIMH cells: 1-15s
PB battery voltage: 2V- 20V
Net weight: 237g
Dimensions: 10.2×8.4×2.9cm
Measurement Error : -+10% (if you can not accept it, please do not buy it )
Charging Operation Method :
Steps 1 : Connect the AC adapter, balance port interface and charging cable, and finally connect the battery to B6 mini.
Steps 2 : Enter start - Press[ INC] key Choose to battery type- Choose to Charging model - BALANCE CHG - Set Charging Current 0.1-6A and Battery Section Number . Can through "DEC" or "INC" key Adjust Current and Cell number .
Then Long press "START" key enter charging model .
Discharge instructions :
Steps 1 : Connect the AC adapter, balance port interface and charging cable, and finally connect the battery to B6 mini.
Steps 2: Choose DISCHARGE - Set Discharger Current (0.1-2A) and Cell number , Can through Press "DEC" or "INC" Key.Adjust the Current Size - Press START enter Discharge model .
![266638091018702848.jpg](https://img1.tongtool.com/s/cacgdejkaecdl9chaeiiifkcldcdkjcekgkbvBse.jpg)
Package Information:
Package size: 145x151x50mm
Package weight:421g
General box package
Note:
Please allow 1-3mm error due to manual measurement, make sure you do not mind before you bid.This product does not contain power adapter, need to be configured before normal use.