I ALSO HAVE BLACK IN STOCK, CONTACT ME
I AM SELLING CHROME BARS IN THIS LISTING
DOES NOT FIT CB750 NIGHTHAWK MODELS!
RECENTLY FITTED TO THE HARLEY STREET 750/500!!!
see last pics!
we rotated the bars forward, for the best tank clearance,
and they look FANTASTIC!
QUICK NOTE:
a customer had issues mounting these bars to his
1993 honda nighthawk 750
(i'd say it will be all years from 1991-2003)
something about needing locating holes to be drilled in the bars,
And switch gear hitting the tank.
Another customer was NOT able to make them work on his 1992 HONDA CB750 Nighthawk.
He was not specific about the issue.
7/8" diameter, Sturdy 2mm wall thickness steel,
wide gas tank clearance-type clubman handlebars,
These allow you to run sleek, cafe type handlebars
with that coveted, low-slung look,
but without tank clearance issues that the typical
BikeMaster smaller clubmans would have.
NOTE: THESE BARS DO NOT COME PRE-DRILLED for wiring!
they are not dimpled, but they are knurled.
Most Clubman bars will hit the gas tank at full lock,
but not these beauties!
There is a wide range of rotational adjustment that
will make them work on 99% of all
7/8" bar bikes!
Even Goldwings!
Please scroll down for lots of pics.
I also have these bars in Powdercoated Gloss and SATIN Black:
item # 221086368524
I also have Comfort clubmans: item # 230821676461
overall width: 28"
center width widest: 11"
knurling clamp area, from outside to outside: 4 3/4"
bar length on each side: 9 1/2" front, 8 1/2" back(where it bends)
YES, you can normally use your stock cables and controls!
Works on both Standards and Specials (XS1100 models)
So check this out: a little cable routing tutorial-
(note this video features my comfort clubman bars-item # 230821676461,
but the cables will route the same way for these clubmans)
https://youtu.be/78HHfiIgHco
There are also some lock to lock still pics up above,
just scroll through all 12 pictures!
Feedback tips:
Thanks again. I love the new feel of the bike with the bars.
For anyone else who may ask in the future at lock to the left you can fit a sheet of paper between the control and the tank,
and on the right the throttle cable tube that comes out of the bottom of the control actually touches the tank before full lock but I don't see it being an issue.
-------hey thanks for the pics, looks fantastic!
did you try rotating the bars a bit to gain extra clearance?
we had to do that on our test bike.best steve
Does your model have removeable risers? or are the clamps cast into the triple clamps?
on models with separate risers, the easy way is put 1" taller.
cast would require fabricationg an adaptor, but sounds like you got it sorted out.
you can also add a dab of epoxy or a weld button on the steering stops.
------------------------------------------------------------------------------------
ACTUAL EBAY FEEDBACK:
DOES NOT FIT CB750 NIGHTHAWK MODELS!
RECENTLY FITTED TO THE HARLEY STREET 750/500!!!
see last pics!
we rotated the bars forward, for the best tank clearance,
and they look FANTASTIC!
QUICK NOTE:
a customer had issues mounting these bars to his
1993 honda nighthawk 750
(i'd say it will be all years from 1991-2003)
something about needing locating holes to be drilled in the bars,
And switch gear hitting the tank.
Another customer was NOT able to make them work on his 1992 HONDA CB750 Nighthawk.
He was not specific about the issue.
Please note: if you choose Economy
Shipping
it may take 10-16 BUSINESS DAYS to arrive!
DO NOT CHOOSE ECONOMY SHIPPING IF YOU ARE IN A HURRY!!!!!
it may take 10-16 BUSINESS DAYS to arrive!
DO NOT CHOOSE ECONOMY SHIPPING IF YOU ARE IN A HURRY!!!!!
7/8" diameter, Sturdy 2mm wall thickness steel,
wide gas tank clearance-type clubman handlebars,
These allow you to run sleek, cafe type handlebars
with that coveted, low-slung look,
but without tank clearance issues that the typical
BikeMaster smaller clubmans would have.
NOTE: THESE BARS DO NOT COME PRE-DRILLED for wiring!
they are not dimpled, but they are knurled.
Most Clubman bars will hit the gas tank at full lock,
but not these beauties!
There is a wide range of rotational adjustment that
will make them work on 99% of all
7/8" bar bikes!
Even Goldwings!
Please scroll down for lots of pics.
I also have these bars in Powdercoated Gloss and SATIN Black:
item # 221086368524
I also have Comfort clubmans: item # 230821676461
Please check out my ebay store:
https://stores.ebay.com/CycleSmith-parts-accessories
just type whatever you are looking for into the search window!
https://stores.ebay.com/CycleSmith-parts-accessories
just type whatever you are looking for into the search window!
overall width: 28"
center width widest: 11"
knurling clamp area, from outside to outside: 4 3/4"
inside to inside: 3
1/8"
center width before it starts to bend: 7 3/4"bar length on each side: 9 1/2" front, 8 1/2" back(where it bends)
YES, they will accept 7/8" barend mirrors!
YES, you can normally use your stock cables and controls!
Works on both Standards and Specials (XS1100 models)
So check this out: a little cable routing tutorial-
(note this video features my comfort clubman bars-item # 230821676461,
but the cables will route the same way for these clubmans)
https://youtu.be/78HHfiIgHco
There are also some lock to lock still pics up above,
just scroll through all 12 pictures!
Feedback tips:
Thanks again. I love the new feel of the bike with the bars.
For anyone else who may ask in the future at lock to the left you can fit a sheet of paper between the control and the tank,
and on the right the throttle cable tube that comes out of the bottom of the control actually touches the tank before full lock but I don't see it being an issue.
-------hey thanks for the pics, looks fantastic!
did you try rotating the bars a bit to gain extra clearance?
we had to do that on our test bike.best steve
Does your model have removeable risers? or are the clamps cast into the triple clamps?
on models with separate risers, the easy way is put 1" taller.
cast would require fabricationg an adaptor, but sounds like you got it sorted out.
you can also add a dab of epoxy or a weld button on the steering stops.
------------------------------------------------------------------------------------
ACTUAL EBAY FEEDBACK:
| Super fast shipping! Bars look great! Very nice transaction. Highly recommended! | Buyer: | During past month |
| Clubman bars Wide Tank Clearance 7/8" cafe clubmans CHROME CB XS GS KZ SR SL |
| Got wrong item- my mistake, but they worked well, great communication,thx | Buyer: | During past month |
| Clubman bars Wide Tank Clearance 7/8" cafe clubmans CHROME CB XS HARLEY STREET |
| A1..THANKS. | Buyer: | During past month |
| Wide Gas Tank Clearance 7/8" Clubman bars cafe clubmans handlebars XS CB GS KZ |
| Really cool, thank you my bike looks great! | Buyer: | Jul-11-14 16:31 |
| Wide Tank Clearance 7/8" Black Clubman bars cafe clubmans handlebars XS CB GS KZ |
| Very cool!!!!!!!!!!!!!!! | Buyer: | Jun-05-14 00:02 |
| Wide Tank Clearance 7/8" Clubman bars cafe clubmans handlebars XS CB GS KZ |
| ottimo venditore, consigliato. (These bars totally rock and so does the seller!-in italian) | Buyer: | Jun-05-14 01:48 |
| Wide Gas Tank Clearance 7/8" Clubman bars cafe clubmans handlebars XS CB GS KZ |
Contact me with any
problems.
Buyer to pay initial shipping cost as well as return shipping if returned. Please contact me before leaving neutral or negative feedback! I have a 100% feedback rating ! as always, ask questions first before buying! I do warranty the product for 14 days- if returned, buyer will pay the original shipping cost, as well as return shipping costs. |