RC4WD Wired Winch Control Unit

Englische Beschreibung:

RC4WD Wired Winch Control Unit

This is the wired Winch Control Unit offered to allow operation function from your radio and receiver. This will allow you to control a winch with your remotes third channel.

Specifications:

Receiver
Small Compact Size
Operating Voltage 6V to 11.1V
Requires 3 position Third Channel
Easy Plug and Play
Instruction Included
Length: 1.6in / 41mm
Width: 1.2in / 31mm
Height: 0.39in / 10mm
Weight: 0.35oz / 10g
Wire
Length: 6in / 150mm
Wires Weight: 0.14oz / 4g
Product
30 Day Warranty
Manufactured by RC4WD

What's Included:
1x Wired Control Unit
1x 6" Receiver/Receiver Power Wire
1x 6" Receiver/Winch Control Wire
Optional Parts:
Warn 1/10 9.5cti 1/10 (Z-S1079)
For Shorter Wires 3" Wiring Pack (Z-S1001)
For Longer Wires 9" Wiring Pack (Z-S0999)
Replacement parts:

Spare Empty Case for Wired Control Unit (Z-S0808)
Notes:
You will need a radio with a third channel to operate this controller.
Your third channel needs to be a three position switch (on/off/on).
If your radio does not have a three position switch, you can purchase a wireless controller unit. (Z-S1092)
This product is not waterproof. You may be able to waterproof on your own, but this will void the manufactures warranty.
For Warnings, Precautions, Safety and Damage Limits: Click Here
If for any reason you cut the wires on the control box, this will void the warranty.
Some Lipo battery voltage can be higher than 11.1 volts. Please be careful and check voltage before using your battery.