![]() Wide Range of Application Suitable for all domestic cars, motorcycles, snowmobiles, off-road vehicles, beaches. Cars, light trucks and speedboats, etc. | ![]() Smoke Flow can be Adjusted Equipped with airflow meter to observe the current airflow volume. And the airflow regulator to better control the smoke effect. | ![]() Safety Design T130 car smoke machine has an intelligent protector, if working temperature exceeds the limit, it will automatically turn off the power to secure the safety of both the operator and device. It's entirely safe for all vehicles . |
![]() | ![]() | ![]() |
Two Working Modes T130 smoke tester adopts independent switch control design, air mode switch independent controlled built-air pump, and smoke mode switch independent controlled smoke generator. | Pipeline System Testing MRCARTOOL T130 smoke leak detector to find out about various pressure problems in your car. It can quickly test crankcase system, air intake system, exhaust system, fuel tank system, EVAP system, EGR system, cooling system, turbo test, vacuum leak test, various fittings and more to determine the leak points visually and accurately. | Visible Test Oil Level and Recover Equipped with an oil level meter to observe the current test volume. And with an oil drain port to recover the remaining test oil after testing. |
![]() | The automotive smoke detector supports air intake system testing, exhaust system testing, crankcase system testing, automotive seal testing, fuel tank system testing, turbo system testing, and various tubing testing. The EVAP Smoke Tester features a dual-mode design with two independent control modes: air mode and smoke mode. Both use smoke generator technology to produce a consistent and large volume of smoke in less than 10 seconds. The upgraded Smoke Leak Tester is equipped with an oil level meter to observe the current test oil level. It also has an airflow meter to observe the current airflow rate. The oil drain facilitates the recovery of any remaining baby oil. Wide range of applications |
![]() | ![]() | ![]() |
Specification: Output pressure:15~17Psi Output flow:6L/Min Power supply: 12V Air source: Built-in air pump Test oil capacity: 15ML Machine size : 160x280x190mm Package weight:3.9KG Test liquid:baby oil(does not include) | Soft Rubber Hose Plug Diameter: 9mm, 12mm, 16mm, 17mm, 20mm, 25mm, 31.5mm, 50mm Hard Rubber Hose Plug Diameter: 5/10mm, 9/15mm, 14/19mm, 18/26mm, 25/35mm, 32/45mm, 45/60mm, 60/75mm | Package Include: 1pc* MRCARTOOL T130 smoke machine 1pc* Power cord clamp 1pc* Smoke hose 1set* Soft rubber hose plug 1set* Hard rubber hose plug 1pc* Test oil bottle 1pc* Valve corde wrench 1pc* EVAP specilal connector & rubber connector part 1pc* Standard cone adapter 1pc* Universal airbag adapter 1pc* User manual |
![]() | ![]() | ![]() |
Fast Smoke Output Equipped with a built-in air pump and smoke genenrator.The smoke can be generated within 10 seconds with stable and large amount of output after switch-on. | Pipeline System Testing T105 EVAP smoke machine comes with various auto smoke machine cone adapter, supports EVAP system, intake system,exhaust system,engine iar tightness,crankcase system and cooling system. | Dual Module Design T105 smoke tester adopt independent switch control design, air mode switch independent controlled built-air pump, and smoke mode switch independent controlled smoke generator. |
![]() | ![]() | ![]() |
Working Pressure Display MRCARTOOL T105 EVAP smoke machine equipped with pressure gauge to help maintenance personnel determine the pipeline leaks more professionally. By observing the change of pressure gauge, the leakge situation is clear at a glance. | Overheat & Anti-frost protection This smoke detector is equipped with the latest intelligent protection device. When the temperature of the device exceeds 80 ℃, the power protection device will be intelligently activated to turn it off, to ensure the safety of the operator and the device. | Wide Range of Application Suitable for all domestic cars, motorcycles, snowmobiles, off-road vehicles, beaches. Cars, light trucks and speedboats, etc. Using together with auto diagnostic tool, you can find the vehicle problem accurately and diagnose fault. |
![]() | Working Principle The smoke machine heats the special oil (mineral oil or baby oil) into smoke and blows the smoke into the sealed pipe system. The place where the smoke leaks on the pipe is the leak point. Just connect with DC12V battery, it can output lots of smoke within 30 seconds after turning on. |
Built-in over-heat protection, if it exceeds working limit (Over 176℉), it will power off automatically |
![]() | How To Use: Unscrew the oil filler cap and add test oil. Connect the car battery, turn on the air pump and smoke generator. Connect the smoke hose to the pipeline to be tested through the adapter. The leak can be judged according to where the smoke appears. |
|
MR CARTOOL automotive smoke leak detector is a specialty tool used with vehicle diagnostic devices to check the tightness of the vehicle pipeline system and find leaks, helping the auto repair technician to quickly and accurately determine whether the fault is caused by the pipeline leaks. | ||
![]() | ![]() | |
Built-in air pump, no need to connect an external air pump, ready for diagnosis and maintenance at any time! | Built-in over-heat protection, Overheat Protection: 80℃ / 176℉ Anti-frost Protection: -15℃ / 5℉ if it exceeds working limit (Over 176℉), it will power off automatically | Upgrade process The power socket has been updated with the latest high-quality material, which will not be loosened or damaged after countless times of use. |
![]() | ||
Fast smoke output It takes only 10 seconds to produce a large amount of smoke at the push of a button. | Wide Range Of Applications For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVS, light trucks and speedboats. Suitable for all car models. | SAFETY DESIGN With built-in overheat and cold-proof protection, it can be used in various environments and operated safely |
![]() | |
Specification: Power Supply:DC12V,Vehicle Battery Output Pressure: 8-12psi Output Flow:<4L/Min Material:Iron Length of Smoke Hose:1.5 Meter Test oil capacity: 10-20ml Air source: built-in Main unit dimension:110×230×155mm Air pressure output: built-in air pump Test Oil: Mineral Oil or Baby Oil(not include) | PACKAGE LIST 1 * T100 Car Smoke Leak Detector Main Unit 1 * Rubber Connect Parts, Hard Rubber Hose Plug (with Serial Specification) 1 * Standard Cone Adapter, EVAP Special Connector 1 * Power Cord Clamp, Smoke Hose, Hook (with Hand-Tighten Nuts), Valve Core Wrench, Test Oil Refill Bottle(Oil not included) 1 * User Manual |