Hardware design centered on high-quality DAC
The DAC chip "ES9038Q2M" mounted on the UA2 is often used in high-grade audio equipment due to the abundance of compatible formats, and by adopting this chip, the UA2 has a minimal appearance, but up to 121 dB. S / N ratio and high resolution / low distortion sound are realized.
768kHz / 32bit | DSD512 compatible
Powerful output level
The independent operational amplifier "RT6863" is installed in a minimum size housing. This design achieves both a powerful output level and further low distortion.
Background noise eliminated to the maximum output level of 195mW @ 32Ω The background noise is effectively suppressed by using an LDO regulator in the internal circuit like the UA1 . The sound you hear from the UA2 will be sharper and quieter during silence.
Good sound brings a deeper immersive experience
The UA2's excellent performance is also useful for non-musical entertainment, movies and games. The voices of each crowd, the foliage swaying in the wind, the creeping footsteps ... the subtle sounds you wouldn't normally feel will invite you to a new world. Two audio output terminals The UA2 has a 3.5mm terminal for single-ended connection and a 2.5mm terminal for balanced connection to meet various needs from general wired earphones to high-end IEMs.
Multi-connection according to the application
Since the UA2 has a structure in which the connection cable can be exchanged, it is possible to connect and use it with various devices with one unit. The product comes standard with an "18-Core / 7-strand high-purity oxygen-free copper USB Type-C to C cable" that enables signal transmission with little loss.
You can also use it as a "UAC (USBAudio Class) 1.0" device by connecting it to a device while pressing the "USB mode button" on the side of the main unit.
(* You need to prepare the standard other than the attached cable by yourself. Also, you do not need to install the driver to use it on a Mac PC, but you can use it on a Windows PC. You need to install the driver distributed by Shanling for normal operation.)
Personalize it by linking with the app
Install the "Eddict Player" app provided by Shanling on your smart device and connect the UA2. only.
Equalizer, 7 types of digital filters, and fine volume and gain adjustment are possible.
It is obvious from the LED display.
During operation, the LED lamp that shows the sampling rate of the file to be played in various colors lights up, and you can check the playback of the high-rate file at a glance.
Body size: 54 x 18 x 9mm
Weight: Approximately 12.6g
Single-ended output characteristic value
Output level: 2V @ 32Ω (125mW @ 32Ω)
Frequency characteristic: 20Hz-50kHz (-0.5dB)
THD + N: 0.0008% @ 32Ω (A) Characteristic @ 0.5V)
Dynamic range: 122dB @ 32Ω (A characteristic)
S / N ratio: 121dB @ 32Ω (A characteristic)
Crosstalk:
76dB @ 32Ω Output impedance: <0.8Ω
Balanced output characteristic value
Output level: 2.5V @ 32Ω (195mW @ 32Ω)
Frequency characteristics: 20Hz-50kHz (-0.5dB)
THD + N: 0.0008% @ 32Ω (A characteristics @ 0.5V)
Dynamic range: 120dB @ 32Ω (A characteristics)
S / N ratio: 116dB @ 32Ω ( A characteristics)
Crosstalk: 109dB @ 32Ω
Output impedance: <1.6Ω
Product contents : UA2
main unit x1
USB-TypeC to C cable x1
USB-TypeC to A connector x1
Quick start guide x1
Warranty card x1
Please contact me if you have any question about this item.