10ML CRYSTAL REPAIR UV RESIN, GLUE FOR GLASS, METAL, FURNITURE + 9 LED UV TORCH.
FREE 3 x AAA BATTERIES
Uv container is an opaque plastic bottle with a pin head dispenser for accurate application or unscrew the cap and apply as required
UV adhesive is a transparent, liquid adhesive which can be cured within
Seconds with the help of UV light source It can be used in various ways for the fixing and adhesive bonding for glass,metal,plastic.
The key factor is one side has to be transparent, which means uv light source must directly expose to the uv glue.
For example: you cannot bond two part of metal together. The common feedback is “this glue doesn’t stick even two piece of paper”
One side must be transparent to the uv source to be able to cure the adhesive
it is best to cure in layers, uv light need to penetrate in to uv adhesive, use a small amount first cure it with uv source, repeat the process
If uv light doesn’t reach the uv glue YOU CAN NOT CURE IT
NOTE***
-DO NOT USE UNDER DIRECT SUNLIGHT
-KEEP THE UV ADHESIVE IN ORIGINAL PACKING
-Do not leave the lid open
Instruction for use
-Uncover dispensing head
-apply required amount
-use the uv torch/laser pen (if supplied)
-Distance should be between 2cm to 7cm
-uv glue start getting hard after 40 to 60 seconds (depends on amount applied can take longer if used more)
- After glue harden place it under direct sunlight for least 2-3 hours even on a cloudy day
-The uv glue might stay tacky/sticky after curing with torch/laser pen etc.. Please leave under direct sunlight for couple hours, uv glue will bone dry.
Safety measures / warnings
Avoid contact with skin, eyes and clothes.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Wear suitable gloves.
Keep away from open fire and sources of ignition.
Protect from heat
Shelf life 1 year from date of purchase