Product specifications: Φ4mm-Φ70mm; Withstand voltage rating: 10KV; Color: Red / Black Temperature range: -60℃~+300℃, the temperature resistance is 800℃ within five minutes, and the temperature resistance can reach 1300℃ within 30 seconds; Flame retardancy: self-extinguishing ULVW-1;
Product performance: 1. High temperature bending test: After heating in a constant temperature oven at 260℃ for 48 hours, there is no aging crack on the surface or no peeling of the coating surface; 2. Low temperature bending test: After heating in a constant temperature oven at -70℃ for 1 hour, there is no crack on the surface or no peeling of the coating surface; 3. Coating film coating test: no surface peeling or dissolution phenomenon occurs after continuous use test in a constant temperature furnace; 4. Combustion test: flame-retardant self-extinguishing and no self-ignition phenomenon (in accordance with ULVW-1 and CSAHFS test); 5. Temperature resistance test: 2000 hours heating test at 260℃ normal and no abnormality, 30 seconds heating test at 1200℃, glass fiber is intact; 6. Flame resistance test: the burning speed is not less than 45s/25mm; 7. Withstand breakdown voltage: depending on the wall thickness, the withstand voltage can reach from 10KV-30KV.
Application areas: 1. High temperature areas in power, chemical and other industries; 2. Heating zone cables, fluid pipelines, feed quick-change connectors, rolling zone rollers, rolling mill cables, oil pipes, sawing peripheral cables, oil pipes and connectors, cables, generator sets, electrical voltage equipment, large Construction, hydraulic system, automobile wiring harness and exhaust pipe, steel-clad car cable coating, etc.; 3. Fireproof and flame retardant protection for trains, high-speed rails, automobile internal lines and exhaust pipes 4. It can provide long-term and reliable insulation protection in a high temperature environment of 300℃, anti-radiation, anti-heat wave, and can withstand the impact of 1300℃ high temperature molten steel or high-heat liquid in a short time.
Product introduction: Fireproof and high-temperature resistant casing, also known as fireproof casing, high-temperature casing, heat-resistant casing, silicon rubber fiberglass casing, made of high-bulk glass fiber casing, and covered with thick iron oxide red Silica gel, which can block molten iron from splashing, and is not damaged by high temperature and flame, has the characteristics that many other similar materials are difficult to replace: high temperature resistance, thermal insulation, flame retardant, electrical insulation, chemical stability, Weather resistance, cold resistance, water resistance, oil resistance, corrosion resistance, ozone resistance, voltage resistance, arc resistance, corona resistance, etc., especially safety and environmental performance. These characteristics make it suitable for protecting hoses in harsh environments. Cables and pipelines are substitutes for hazardous products such as asbestos.
The fireproof casing can be continuously exposed to high temperature of 300℃ without being damaged. It can withstand high temperature of 1300℃. The destructive test at 1300℃ can last for half an hour. After half an hour, the outer coating begins to carbonize and the glass fiber is intact. The flame-retardant properties of the fire-proof casing can not only effectively prevent personnel from being burned by high-heat pipelines, but also greatly save the cost of heat energy loss. Fire-proof casing is mainly used for cable insulation protection in high-temperature places such as steel plants, smelters, glass factories, etc., especially for the molten steel that splashes out instantly, the super-thick protective layer of the casing can play an excellent role in protecting the cables in the pipe .