Controller：

--Double y-axis, all-round use,XYZ or XYY.

--Stepper drive setup subdivision.

--Integrated 3 A4988 drivers, directly connect to four wire stepper motor.

--Support Laser or Spindle.

--Support 12V, 5V with TTL and without TTL laser.

--Adjustable driver subdivision.

--Support the xyz limit switch, probe interface.

--Support external Offline Controller(Optional).

--A4988 can be replaced with 8825 driver.

Nano 3Axis Control Board is a Arduino Nano based 3 Axises Motion control system, can be used

for Laser Engraving machine, Drawer Machine, CNC Engraving Machine etc.

 

Offline：

1. Manual Check: Manually adjust the X, Y, Z axis position as the starting point of engraving, manually turn the spindle on or off, and manually turn the cooling fan on or off.
2. Engraving Files: After the offline controller saves the file, you can connect the GRBL control card and the engraving process without connecting the PC to the computer.
3. Save the File: After the offline controller is connected to the PC, it is recognized as a USB, mass storage device, which can directly affect the access file.

Button Operation:
-Press the Z+ and Z-:Z axes to move up and down.
-Press the X+ and X-: X axes to move left and right.
-Press Y+ and Y-: Y axis to move back and forth.
-Press SPIN: Spindle is on (laser on), spindle is off (laser off).
-Press Z+ 5 seconds: Change the language to English.

Product include:

Control board +offline:

1*Control board

1*USB Data line

1*775 motor line

1*LCD ( 1.8 inch)

 

Wa!Wa!Wa!Upgrade!Limits, Fans all can be connected!

 

Chinese and English system, long press Z+ on the homepage to switch between Chinese and English！