150W DC-DC Boost Constant Current Module Step Up Module 10-32V to 10-46V NEW
Features
1: 150W step-up constant voltage and constant current
2: Conversion efficiency: up to 95% (efficiency is related to input and output voltage, current and differential pressure)
3: Easy to install and use
4: Widely used
5: Short circuit protection: Yes (input 15A fuse)
2: Conversion efficiency: up to 95% (efficiency is related to input and output voltage, current and differential pressure)
3: Easy to install and use
4: Widely used
5: Short circuit protection: Yes (input 15A fuse)
Specification
Module name: 150W step-up constant current module
Module nature: Non-isolated boost module (BOOST)
Input voltage: 10-32V input
Input current: 16A (MAX) More than 8A please strengthen the heat dissipation
Static working current: 15mA (when 12V to 20V, the higher the output voltage, the higher the static current will increase)
Output voltage: 10-46V continuously adjustable (default output 19V)
Output current: 8A MAX More than 4A, please strengthen the heat dissipation (related to the input and output pressure difference, the larger the pressure difference, the smaller the output current)
Output constant current range: 0.3-8A
Turning light adjustment range: 0.3-8A
Output power: natural heat dissipation 90W, enhanced heat dissipation 150W
Operating temperature: -40~+85 degrees (please strengthen the heat dissipation when the ambient temperature is too high)
Operating frequency: 150KHz
Conversion efficiency: up to 95% (efficiency is related to input and output voltage, current and voltage difference)
Short circuit protection: Yes (input 15A fuse)
Input reverse connection protection: no, (if required please put diodes in series with the input)
Mounting: 4 x 3mm screws
Wiring method: terminal block free soldering output, with housing for soldering output. (V-IN for input, V-OUT for output)
Module size: length 60mm width 50mm height 20mm
Module name: 150W step-up constant current module
Module nature: Non-isolated boost module (BOOST)
Input voltage: 10-32V input
Input current: 16A (MAX) More than 8A please strengthen the heat dissipation
Static working current: 15mA (when 12V to 20V, the higher the output voltage, the higher the static current will increase)
Output voltage: 10-46V continuously adjustable (default output 19V)
Output current: 8A MAX More than 4A, please strengthen the heat dissipation (related to the input and output pressure difference, the larger the pressure difference, the smaller the output current)
Output constant current range: 0.3-8A
Turning light adjustment range: 0.3-8A
Output power: natural heat dissipation 90W, enhanced heat dissipation 150W
Operating temperature: -40~+85 degrees (please strengthen the heat dissipation when the ambient temperature is too high)
Operating frequency: 150KHz
Conversion efficiency: up to 95% (efficiency is related to input and output voltage, current and voltage difference)
Short circuit protection: Yes (input 15A fuse)
Input reverse connection protection: no, (if required please put diodes in series with the input)
Mounting: 4 x 3mm screws
Wiring method: terminal block free soldering output, with housing for soldering output. (V-IN for input, V-OUT for output)
Module size: length 60mm width 50mm height 20mm
Application range
1、DIY a regulated power supply, input 12V can be, output can be 12-46V/60V adjustable.
2, for your electronic equipment power supply, you can set the output value according to your system voltage.
3, as a car power supply, for your laptop, PDA or various digital products power supply. Optional high-grade thickened sanding and oxidation aluminum alloy shell, directly PK off the market ordinary car power supply or inverter, is the best choice for you like metal texture.
4、DIY a high-power laptop mobile power supply: with a high-capacity 12V lithium battery pack, so that your book can be bright wherever you go
5、Solar panel voltage stabilisation.
6、Charge the battery, lithium battery, etc.
7、Drive high power LED lights.
1、DIY a regulated power supply, input 12V can be, output can be 12-46V/60V adjustable.
2, for your electronic equipment power supply, you can set the output value according to your system voltage.
3, as a car power supply, for your laptop, PDA or various digital products power supply. Optional high-grade thickened sanding and oxidation aluminum alloy shell, directly PK off the market ordinary car power supply or inverter, is the best choice for you like metal texture.
4、DIY a high-power laptop mobile power supply: with a high-capacity 12V lithium battery pack, so that your book can be bright wherever you go
5、Solar panel voltage stabilisation.
6、Charge the battery, lithium battery, etc.
7、Drive high power LED lights.
Operating instructions
I. Output current adjustment method.
1, adjust the CV potentiometer, according to your battery or LED, set the output voltage to the voltage value you need. Such as 10 strings of LED voltage adjustment 37V, four strings of battery adjustment 55V, etc.
2、Set the CC potentiometer counterclockwise for about 30 turns, set the output current to the minimum, connect the LEDs and adjust the CC potentiometer to the current you need. For battery charging, after discharging the battery, then connect to the output and adjust the CC to your desired current, (for charging, you must use the discharged battery to adjust to be accurate, because the more power left in the battery, the smaller the charging current.) Please do not use the short circuit way to adjust the current, the circuit structure of the booster module can not be adjusted with a short circuit way.
Second, the current adjustment method of the light: (The light function is used to indicate whether the battery is full. (Red light when charging, green light when full.) Use a fully charged battery connected to the output, and adjust the turn signal potentiometer to light up the red light.
I. Output current adjustment method.
1, adjust the CV potentiometer, according to your battery or LED, set the output voltage to the voltage value you need. Such as 10 strings of LED voltage adjustment 37V, four strings of battery adjustment 55V, etc.
2、Set the CC potentiometer counterclockwise for about 30 turns, set the output current to the minimum, connect the LEDs and adjust the CC potentiometer to the current you need. For battery charging, after discharging the battery, then connect to the output and adjust the CC to your desired current, (for charging, you must use the discharged battery to adjust to be accurate, because the more power left in the battery, the smaller the charging current.) Please do not use the short circuit way to adjust the current, the circuit structure of the booster module can not be adjusted with a short circuit way.
Second, the current adjustment method of the light: (The light function is used to indicate whether the battery is full. (Red light when charging, green light when full.) Use a fully charged battery connected to the output, and adjust the turn signal potentiometer to light up the red light.
List
1 x Boost Constant Current Module
1 x Boost Constant Current Module
-
If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money. - If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
- 1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
- EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
* When you satisfied with our product and services please leave us positive feedback.
* If you have got the package, please confirm "Delivery on time" For us.
* If a problem occurs, contact us immediately with any email request.
* Just contact us using the " Ask the seller a question" link on eBay.
Am 11.03.22 hat der Verkäufer die folgenden Angaben hinzugefügt: