77Ghz Millimeter Wave Radar BSD Blind Spot Detection System Horizontal 164ft Vertical 14.43ft
Product Introduction:
This system product can warn the dangerous targets in the adjacent lanes. The unique ability of 77Ghz millimeter radar to penetrate smoke, fog and dust can realize all-weather and all-time application, detect the objects in the signal area in real time, and calculate the speed, angle and relative displacement of 64 objects at the same time. It can detect the target within 50M(164ft) at the farthest, and finally output the alarm signal, which includes the first-level alarm and the second-level alarm.
Product Functions Explanation:
1.After the ACC is powered on, the system can immediately enter the working state after the environmental adaptation test. When the car is turned off, the radar stops working.
2.The system is in the first-level early warning state except when the turn signal lamp is turned on, double flashing warning lamp and R reverse gear is engaged.
3.When the turn signal is turned on, double flashing warning lights and R reverse gear is engaged, the system is in the second-level early warning state.
Level 1 alarm: the reminder light is always on.
Level 2 alarm: the warning light flashes+the buzzer sounds.
The alarm range is centered on the rear of the car. The lateral distance is X and the longitudinal distance is Y. The left lateral distance of the center is negative, and the right lateral distance of the center is positive.
1.Product self-inspection
Normal state of equipment:
1) After the equipment is powered on, the left and right indicator lights flash 3 times respectively.
2) When the car speed exceeds 15km/h and there is a target car in the blind area, the indicator light is on, and the steering buzzer sounds and the indicator light flashes.
Equipment abnormal situation:
1) After the equipment is powered on, the left and right lights flash once, the control box is normal, and the radar is abnormal.
2) After the equipment is powered on, the indicator light always goes off, and the radar of the control box does not work normally. Please check whether the power-on signal intervenes normally.
System starting speed: V≥15Km/h.
Horizontal range of early warning:
1.5m≤X≤4.4m(4.92ft≤X≤14.43ft),-4.4m≤X≤-1.6m(-14.43ft≤X≤-5.25ft).
Longitudinal range of early warning: 0 m≤Y≤6.5m(0ft≤Y≤21.32ft).
Early warning strategy: alarm for moving targets in the alarm area.
Including active overtaking or passive overtaking, the relative overtaking speed is not more than 20km/h.
BSD early warning mode:
A.When the moving object enters the blind area monitoring area (the car does not turn on the turn signal), it will give a first-class warning until the target object leaves the monitoring area and cancel the warning.
B.When the moving object enters the blind area monitoring area (the vehicle turns on the turn signal), a second-level warning will be generated until the target object leaves the monitoring area, and the warning will be cancelled.
System starting speed: V≥15Km/h.
Horizontal range of early warning:
1.5m≤X≤4.4m(4.92ft≤X≤14.43ft),-4.4m≤X≤-1.6m(-14.43ft≤X≤-5.25ft).
Longitudinal range of early warning: 0m < Y≤ 50m(0ft≤Y≤164ft).
Early warning strategy: approach time ≤ 4.0s.
LCA vehicle approach early warning mode:
Specifications:
1.Operating voltage: 9 V- 32 V
2.Operating frequency band:77 -79Ghz
3.Working temperature:- 25℃ ~ +75℃(-13 ℉~167℉)
4.Power consumption:< 3 W
5.Waterproof grade:IP 67
6.Distance resolution: 0.2M (0.656ft)
7.Ranging accuracy: is better than 0.1M(0.328ft)
8.Detection range:0-50 m(0-164ft)
9.Horizontal angle range:150°
10.Pitch angle range: ±10°
11.Velocity measurement accuracy: 0.1m(0.328ft)/s
Packing List:
1*Power cord (1m/39.37in)
2*Reminder light extension cable (4m/157.48in)
2*In-car warning light
1*In-car buzzer
1*Power extension cord (5m/196.85in)
1*77Ghz millimeter wave radar
1*Host control box
1*Radar bracket
1*Main box radar connection cable (main box connection cable is 1 meter (39.37in), the left and right turn signal and reversing light lines on the main box connection cable are 2.5 meters (98.42in) (yellow, orange, white)
1*Instruction
Connection method of power cord(For more installation methods, please see the manual):
Route the power extension cord from the front of the car to the rear of the car. Plug the front of the car into the power cord, and plug the rear of the car into the box line of the radar mainframe.
E.The orange line is connected to the positive pole of the right turn signal lamp.
F.The white line is connected to the positive pole of the reversing lamp.